Multi-axle Low-bed Semi-trailer
Our multi-axle low-bed semi-trailers provide a robust platform for heavy-haul transport. Built with high-strength frames and specialized axle configurations, they distribute heavy loads more evenly while helping operators meet regional transportation requirements.
Product Introduction
Our multi-axle low-bed semi-trailers provide a robust platform for heavy-haul transport. Built with high-strength frames and specialized axle configurations, they distribute heavy loads more evenly while helping operators meet regional transportation requirements.
Product Configurations
|
Product Specifications |
Technical Details |
|
Target Cargo |
Excavators, bulldozers, transformers, wind turbine nacelles, industrial modules |
|
Net Payload |
100–300 t |
|
4–5 Axle Lines |
100–140 t payload; 20–26 t tare; 120–166 t GVW |
|
6–8 Axle Lines |
150–220 t payload; 30–40 t tare; 180–260 t GVW |
|
10–12+ Axle Lines |
230–300 t payload; 48–60 t tare; 278–360 t GVW |
|
Axle Line Rating |
20–25 t static; 13–16 t dynamic at 60 km/h |
|
Axle Line Layout |
2 stub axles or 1 full axle; 8 tires per line |
|
Axle Spacing / Track |
1,310–1,550 mm / 2,300–2,500 mm |
|
Concentrated Load |
Up to 40 t over 1.5 m × 1.0 m |
|
Uniform Load |
Full rated payload evenly distributed |
|
Extended Deck |
Up to 3.6 m wide; maximum 70% payload when extended |
Main Frame Structure
Beam Dimensions: Features 20–25 mm upper flanges, 25–30 mm lower flanges, and 12–16 mm web plates sized to the payload class.
Crossmember Spacing: Interlocking box crossmembers are spaced at 400 mm centers in primary load zones and 500 mm in secondary areas.
Axle, Suspension & Hydraulic Steering System
Axles: Built with heavy-duty assemblies (such as FUWA F2400 or BPW Heavy Duty series) fitted with tapered roller bearings.
Suspension Options:
- Mechanical Rocker Arm: Equalizes load between adjacent axles for standard highway transport.
- Hydraulic Line Suspension: Operates at 16–21 MPa with 300 mm total stroke (±150 mm) for leveling and ground clearance.
Steering: Self-steering axles or hydraulic forced-steering provide up to a 45° wheel angle for tight turns.
Platform Dimensions & Loading System
|
Product Specifications |
Technical Details |
|
Usable Platform Length |
11–16 m |
|
Overall Trailer Length |
16–22 m |
|
Platform Width |
3.0–3.2 m; up to 3.6 m extended |
|
Laden Deck Height |
750–850 mm |
|
Unloaded Deck Height |
850–920 mm |
|
Hydraulic Height Adjustment |
±150 mm |
|
Tire Options |
235/75R17.5 or 10.00R20 |
|
Deck Design |
Drop-deck or sunken-beam |
|
Gooseneck Options |
Fixed rear-loading or hydraulic detachable front-loading |
|
Gooseneck Hydraulic System |
Dual cylinders; 21 MPa; check valves and lock pins |
|
Ramp Capacity |
80 t total static load; 40 t per ramp |
|
Ramp Specifications |
Minimum 2.0 m track contact; 12°–15° loading angle |
|
Loading Supports |
Mechanical landing gear and hydraulic rear stabilizers |
Custom Engineering
Tractor Interface: Kingpins (2 in or 3.5 in per ISO 337 / SAE), saddle height, tractor axle capacity, and swing clearance are tailored to your truck tractor.
Engineering Inputs: Buyers provide cargo weight, footprint, center of gravity, support points, and tractor fifth-wheel capacity for structural alignment.
Road Compliance: Frame width, axle spacing, kingpin position, and overall length can be modified to meet regional transport laws.
Deliverables: Standard contracts include 2D/3D CAD approval drawings, axle-load distribution charts, and kingpin load calculations. Third-party load test reports are available on request.
Quality Assurance
Surface Prep & Finish: Frames are shot-blasted to Sa 2.5 (ISO 8501-1), primed with zinc-rich epoxy (60 μm), and finished with polyurethane topcoat (60 μm).
Weld Inspection: Critical structural welds undergo 100% UT or Magnetic Particle Testing (MT) per ISO 5817 Level B.
Pressure Testing: Hydraulic lines are tested at 31.5 MPa (1.5× working pressure); air brakes undergo pneumatic leak tests at 800 kPa for 30 minutes.
Tolerances: Axle parallel alignment is held within ≤2.0 mm; frame diagonal tolerance is within ≤3.0 mm.
Warranty Coverage
Main Frame: 12-month structural warranty against cracking or deformation under rated load.
Axles & Suspension: 12 months or 100,000 km against manufacturing defects.
Hydraulics & Brakes: 6-month limited warranty under normal operating conditions.
Exclusions: Standard wear items (tires, brake linings, bushings) and operational overload.
Lead Time: 35–50 working days from drawing sign-off and deposit receipt (excludes special buyer-specified component lead times).



FAQ
Q: Which axle configuration is right for our cargo?
A: Share your cargo weight, dimensions, and route restrictions, and we will recommend the optimal axle lines and deck design.
Q: Is the trailer compatible with our existing tractor?
A: Yes. Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility or adjust the interface before drawing approval.
Q: Can the trailer handle off-road or uneven job-site conditions?
A: Yes. Hydraulic suspension with ±150 mm adjustment and forced steering lets the trailer cope with uneven ground and tight sites.
Q: Can we inspect the trailer before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory, witness a hydraulic and braking function test, and review the final inspection report before release.
Q: Is CE marking or other regional certification available?
A: Yes. CE marking and other regional compliance documents can be arranged as an option.
Q: Can the trailer be shipped in a way that reduces freight cost?
A: Yes. Detachable components, such as the gooseneck and ramps, can be separated to meet the dimensional limits of flat-rack or Ro-Ro shipping.
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit at order confirmation, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Q: What is the expected service life of the trailer?
A: With proper maintenance, the trailer delivers 12 to 15 years of dependable heavy-haul service, depending on load cycles and road conditions.
Hot Tags: multi-axle low-bed semi-trailer, China multi-axle low-bed semi-trailer manufacturers, suppliers, factory, Detachable Low bed Semi trailer, Fixed Low bed Semi trailer, Heavy Haul Low Bed Semi Trailer, Lightweight Low bed Semi trailer, low bed semi trailer, Multi axle Low bed Semi trailer
You Might Also Like
Send Inquiry









