Heavy-Duty Dump Trucks for Highway and Off-Road Applications

 

A dump truck is a heavy-duty commercial vehicle with a hydraulically lifted open cargo bed for unloading bulk materials. Built to haul sand, gravel, crushed stone, coal, and earth across paved highways and unpaved job sites.

 

 
 
Typical Applications

Building & Urban Construction

Highway-legal 6x4 and 8x4 dump trucks haul excavated soil, sand, aggregates, and demolition debris between urban sites and disposal zones.

 

Mining & Quarry Operations

Reinforced 6x4, 8x4, and 6x6 road-going units move crushed ore and aggregate from pit to plant, distinct from dedicated wide-body off-road mining trucks built for oversized open-pit loads.

Road & Highway Construction

Trucks with sealed tailgates and optional exhaust-heated beds deliver hot-mix asphalt, base aggregate, and sub-base fill directly to pavers.

Water Conservancy & Infrastructure

Heavy-duty units support continuous earthmoving for dam embankments and regional infrastructure projects where site access permits.

 

Chassis & Powertrain
 

Product Parameter

Specifications

Drivetrain

4×2, 6×4, 8×4, 6×6

Axle Ratings

6×4: 7.5 t front / 13 t rear; 8×4: 7.5 t × 2 front / 16 t rear

Suspension

Multi-leaf springs; 10/12-leaf (6×4), 12/12-leaf (8×4)

Tire Options

12.00R20 (18PR–20PR); 12R22.5; 315/80R22.5

Ground Clearance

290–360 mm; Approach: 25°–32°; Departure: 22°–28°

Engine & Transmission

290–430 HP; 10/12-speed manual; optional AMT

Gradeability & Speed

28%–40%; 75–85 km/h

Fuel Consumption

32–45 L/100 km under specified mixed-haul conditions

Emission Compliance

Configured to destination-market fuel and emissions requirements

 

Dump Body
 

Product Parameter

Specifications

Payload Matching

Coal: 0.8–1.0 t/m³; Crushed granite: 1.6–1.8 t/m³

Body Types

Rectangular box, U-shaped, V-shaped

Body Steel

Q345B; optional NM400/NM450

Plate Thickness

Floor: 6–8 mm (up to 10 mm); Sides: 4–6 mm (up to 8 mm)

Hydraulic System

Front-mounted telescopic cylinders; 45°–52° tipping angle; 25–40 sec lifting cycle

Tailgate Design

Mechanical auto-locking; optional reinforced chain-linked type

 

SHACMAN Delong Dump Truck

 

Custom Configurations

Payload & Chassis Adaptation: Frame reinforcement and spring ratings can be adjusted to align target payload and curb weight with local axle-load and GVW regulations.

 

Dump Body Customization: Internal body length (5,200–8,200 mm), side-wall height, rib spacing, and tailgate mechanics can be built to project drawings and loader clearance.

 

Regional & Regulatory Compliance: Available in LHD or RHD, with destination-specific lighting, underrun protection bars, speed limiters, and day-cab or sleeper-cab layouts.

 

Optional Equipment: Available with manual or electric waterproof tarpaulin systems, exhaust-heated beds for cold climates, rear-view cameras, and protective guards for fuel tanks and taillights.

 

 

Quality Control

Body Fabrication & Assembly: Body fabrication, sub-frame welding, shot-blasting, two-component epoxy priming, polyurethane topcoating, and hydraulic integration are completed in-house on OEM-supplied commercial chassis.

 

Welding & Structural Inspection: Every dump body undergoes dimensional checks and 100% visual weld inspection, with ultrasonic or magnetic particle testing applied to critical load-bearing sub-frame joints and hydraulic lift brackets.

 

Pre-Delivery Testing: Completed trucks undergo hydraulic pressure/leak checks, full-angle tipping stability tests, air-brake pressure verification, wheel alignment, and road trials, documented in pre-delivery inspection records.

 

Certifications & Traceability: Operations follow ISO 9001 quality and ISO 14001 environmental management systems; steel mill test certificates and pre-delivery inspection reports are provided upon request.

HOWO Heavy Duty Dump Truck

 

 

FAQ

 

Q: How do I choose between 4×2, 6×4, 8×4, and 6×6 dump trucks?

A: Choose a 6×4 for general construction hauling and an 8×4 for higher payloads on highway routes. Select a 6×6 for soft, steep, or unpaved sites where traction matters most.

Q: What body volume and steel grade fit my material?

A: Match volume to material density: lighter loads like coal allow larger bodies, while crushed granite calls for a smaller body to stay within axle limits.

Q: How do I choose the right dump body type?

A: A rectangular box suits general aggregates and soil. A U-shaped body unloads cleanly and resists sticking, which works well for rock and quarry loads. A V-shaped body helps with sticky or fine materials.

Q: How can I avoid overloading when hauling dense material?

A: Load to a weight target rather than to full volume. We can adjust frame reinforcement, spring ratings, and body size to align payload with your local axle-load and GVW limits.

Q: Can the truck meet the axle-load and vehicle regulations in my country?

A: Yes. Axle ratings, body dimensions, lighting, underrun bars, and speed limiters can be configured to destination rules.

Q: Which engine and emission standard should I choose?

A: Select the engine output based on your gradients and payload, and the emission level based on your market’s fuel quality and regulations.

Q: Is a dump truck suitable for mining?

A: Our reinforced road-going units suit quarry and pit-to-plant hauling on permitted roads. For oversized open-pit loads, a dedicated wide-body off-road mining truck is the better choice.

As one of the most professional dump truck manufacturers and suppliers in China, our products have good reputation in the market. Please feel free to buy premium dump truck made in China here from our factory. Quality products and reasonable price are available.

dump truck, HOWO TX7 Dump Truck, SHACMAN Delong Dump Truck

(0/10)

clearall