6 Wheel Drive Dump Truck
video
6 Wheel Drive Dump Truck

6 Wheel Drive Dump Truck

The 6×6 All-Wheel-Drive Dump Truck is designed for demanding off-highway hauling. Powered by a Weichai diesel engine and Fast transmission, it features hub-reduction axles and a reinforced double-layer ladder frame for reliable stability on soft ground and steep haul roads.

Product Introduction

The 6×6 All-Wheel-Drive Dump Truck is designed for demanding off-highway hauling. Powered by a Weichai diesel engine and Fast transmission, it features hub-reduction axles and a reinforced double-layer ladder frame for reliable stability on soft ground and steep haul roads.

 

Product Specifications

 

Specification

Details

Engine

Weichai WP12.400, 11.6L, 400 HP, 1,920 Nm torque

Transmission

Fast Gear 12JSD200T, 12 forward gears, 2 reverse gears

Transfer Case

Dual-range, 1:1 high range, 1.6:1 low range

Drive Axles

Front steering drive axle, tandem hub-reduction rear axles

Emissions

Euro II / III / IV

Chassis Frame

Q345B steel, 300 × 80 mm, double-layer 8+8 mm

Curb Weight

Approx. 15,000 kg

Rated Payload

20,000–25,000 kg

Gross Vehicle Weight

35,000–40,000 kg

Axle Capacity

Front: 9,000 kg; Rear tandem: 26,000 kg

Suspension

Multi-leaf springs; 9/10 front leaves, 12 rear leaves

Braking System

Dual-circuit pneumatic drum brakes, exhaust brake, optional ABS

DSC1923
DSC1925

Key Features

 

Drive Configuration: Available in Selectable 6×6 (cab-controlled transfer case) or Full-time 6×6 depending on model specification.

 

Differential Locks: Includes 3 mechanical locks-one inter-axle lock in the transfer case and two inter-wheel locks across the tandem rear axles-engaged via dash switches.

 

Gradeability: Rated up to 40% gradeability fully loaded in low-range transfer gear, subject to ground friction and tire grip.

 

Turning Radius: 11-meter minimum turning radius measured at the outer tire track.

 

Tire Options: 12.00R20 tube-type directional off-road tires or 315/80R22.5 tubeless multi-surface radials on heavy-duty steel rims.

 

Dump Body Capacity

 

Volumetric Capacity: Standard 5.6m × 2.3m × 1.8m internal dimensions yield a 23.1 m³ geometric volume, rated for up to 25 tons depending on axle limits and local GVW regulations.

 

Payload Density Notes: 23.1 m³ capacity fits materials up to ~1.08 t/m³ at level fill; higher-density rock or ore requires partial filling to stay within axle limits.

 

Hydraulic Tipping System

 

Steel Specifications: Built with Q345B high-tensile steel, featuring 8–10 mm floor plates and 6–8 mm side walls. NM400 wear-resistant steel is available for high-abrasion applications.

 

Hydraulic Lift: Front-mounted multi-stage telescopic cylinder providing a 45° tipping angle with a 30- to 45-second raise cycle under standard operating pressure.

 

Tailgate Mechanism: Automatic mechanical tailgate with dual bottom-hook latches to hold loose loads during transport.

 

OEM Configuration Options

 

Drive Position: Factory LHD or RHD layouts with matching dashboard and steering assemblies.

 

Cargo Body Tailoring: Custom lengths, wall heights, plate thicknesses, and rectangular or U-shaped box profiles.

 

Powertrain Specs: Optional engine ratings, alternative gear ratios, final drive ratios, and high-altitude packages (larger radiators and intake pre-cleaners).

 

Chassis Add-ons: Auxiliary fuel tanks, reinforced sub-frames, snorkel air intakes, and specialized off-road tire patterns.

 

Maintenance Access

 

Cab Tilting: 55° forward hydraulic tilt mechanism (manual pump standard; electric-hydraulic optional) for direct access to the engine bay and check points.

 

Service Parts: Standardized filter elements, brake linings, and hydraulic seals to simplify local replacement.

 

Spare Parts Ordering: Consumables and replacement parts cross-referenced by VIN and OEM part numbers for straightforward fleet ordering.

 

Documentation: Supplied with English operator manuals, maintenance schedules, wiring diagrams, and spare parts catalogs.

 

Production Process

 

Factory Showcase

 

FAQ

 

Q: Which drive setup is right for our terrain?

A: Choose selectable 6×6 for mixed highway and off-road use, as it saves fuel on paved roads. Choose full-time 6×6 for sites that are consistently soft or steep.

Q: Is the truck suitable for hot climates or high altitude?

A: Yes. It is rated for operation from -20°C to +45°C and at altitudes up to 2,000 m.

Q: Which tires should we choose for our haul roads?

A: Choose directional off-road tires for mud, sand, and loose ground, and multi-surface radials for mixed routes with more paved mileage.

Q: What are the MOQ and standard lead time?

A: MOQ is 1 unit. Standard lead time is 20 to 30 days from deposit confirmation, depending on configuration and chassis availability.

Q: Can we inspect the truck before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the truck at our factory and witness a functional test before release.

Q: What warranty do you provide?

A: We offer a 12-month or 50,000 km warranty, whichever comes first, covering the engine, transmission, axles, and hydraulic hoist. Replacement parts are supplied free of charge during the warranty period.

Q: How quickly can you respond to after-sales requests?

A: Our service team replies to technical inquiries within 24 hours, and critical spare parts are dispatched within 48 hours by express courier.

Q: Is CE marking or other regional certification available?

A: Yes. CE marking and other regional compliance packages can be arranged as an option, subject to additional lead time and cost.

Hot Tags: 6 wheel drive dump truck, China 6 wheel drive dump truck manufacturers, suppliers, factory, 6 Wheel Drive Dump Truck, Box type Dump Truck, dump truck, Heavy Duty Rear Dump Truck, HOWO TX7 Dump Truck, SHACMAN Delong Dump Truck

You Might Also Like

(0/10)

clearall