Box-type Dump Truck
video
Box-type Dump Truck

Box-type Dump Truck

The Sitrak box-type dump truck is engineered for high-volume bulk material transport across demanding mining, construction, and infrastructure projects.

Product Introduction

The Sitrak box-type dump truck is engineered for high-volume bulk material transport across demanding mining, construction, and infrastructure projects. Configured with a Weichai 460 HP diesel engine and an 8×4 heavy-duty chassis, this tipper unit delivers dependable payload transport for earthworks, gravel, aggregate, and site waste hauling under challenging operating conditions.

 

Product Specifications

 

Item

Specifications

Engine

Weichai WP12.460E50, 460 HP (338 kW)

Maximum Torque

2,110 N·m @ 1,000–1,400 rpm

Emission Standard

Euro V standard; Euro II/III/IV options

Transmission

HW19712, 12 forward + 2 reverse gears

Gear Ratios

15.01 first gear / 0.78 top gear

Front Axles

Dual HF9, 9-ton steer axles

Rear Axles

Dual HC16, 16-ton hub-reduction drive axles

Suspension

Multi-leaf springs, 10 front / 12 rear

Tires

12 × 12R22.5 18PR tubeless tires

Spare Tire

1 unmounted spare assembly

Rims

9.00×22.5 steel rims

 

Payload Capacity

 

GVW & Payload: 31,000 kg GVW (15,800 kg highway payload) under standard road certifications; 40,000 kg GVW (24,800 kg off-road payload) for closed site applications.

 

Curb Weight & Axles: Base curb weight of 15,200 kg. Dual 9,000 kg front steer axles and dual 16,000 kg double-reduction rear drive axles yield a combined 50,000 kg chassis rating.

 

Wheelbase: Built on a 3800+1400 mm wheelbase for balanced weight distribution across steering and drive assemblies.

 

Density & Fill Control: The 25.6 m³ box provides geometric capacity. At 1.1 t/m³ (loose soil), maximum off-road payload (24.8 t) requires a fill volume of ~22.5 m³. High-density materials (~1.5 t/m³) require partial loading to remain within axle limits.

 

Dump Body Structure

 

Box Dimensions: Internal dimensions of 6.2 m (L) × 2.3 m (W) × 1.8 m (H) yield a theoretical volume of 25.6 m³.

 

Steel Grades: Standard build uses an 8 mm Q345B steel floor and 6 mm Q345B sidewalls/front plate. Optional 10 mm floor / 8 mm side plates or NM400 wear-resistant steel are available.

 

Subframe Assembly: Built with 160 mm U-channel main subframe beams and 80×60 mm exterior crossmembers spaced every 350 mm under the floor.

 

Tailgate Locking: Dual-hook mechanical latches sync with hydraulic lowering. Rubber perimeter gaskets prevent liquid and fines leakage.

 

Operating & Hydraulic Performance

 

Item

Specifications

Loading Height

3.3 m top rim height

Box Width

2.3 m

Gradeability

35% at rated payload

Ground Clearance

315 mm under rear axle

Turning Diameter

24 m minimum

Material Compatibility

Coal/coke, soil, crushed stone

Braking System

Dual-circuit air brakes, four-axle drum brakes

ABS & Parking Brake

WABCO 4-channel ABS; spring-actuated parking brake

Frame Structure

Double-layer ladder frame, 8+8 mm, 300 mm beam height

Service Intervals

Engine: 15,000 km/300 h; gearbox and axles: 40,000 km

Hydraulic Cylinder

Hyva FC-191-5, 5-stage, 191 mm bore

Hydraulic Pressure & Flow

19 MPa; 100 L/min

Tipping Performance

48°; raising 30–35 sec, lowering 20–25 sec

Hydraulic Safety

Stroke limit valve and emergency lowering valve

 

Custom Configuration

 

Steering Layout: Factory Left-Hand Drive (LHD) or Right-Hand Drive (RHD).

 

Powertrain Options: Alternative engines (Weichai or Sinotruk MC series, 371–480 HP) match local Euro II–V regulations and fuel sulfur levels.

 

Optional Add-Ons: Thicker floor plates (up to 12 mm), manual/hydraulic tarp systems, cab AC, 360° cameras, and heavy-duty front/side guards.

 

Export Documentation: Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin (Form E/Form F), and technical datasheets for local vehicle registration.

 

Production Process

 

Factory Showcase

 

Packaging & Transportation

 

FAQ

 

Q: Should we choose the 31-ton or 40-ton GVW configuration?

A: Choose 31 t GVW for trucks that run on public highways and must meet legal axle limits. Choose 40 t GVW for closed mine or quarry sites where higher payloads are permitted.

Q: Which body specification suits our material?

A: Choose the standard body for soil, gravel, and general aggregates. Choose the NM400 wear-resistant or thicker-plate body for blasted rock and highly abrasive loads. Share your material type and haul conditions for a tailored recommendation.

Q: What are the MOQ and standard lead time?

A: MOQ is 1 unit. Standard lead time is 15 to 25 days from deposit confirmation, depending on configuration and chassis availability.

Q: Can we inspect the truck before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the truck at our factory and witness a functional test before release.

Q: Is CE marking or other regional certification available?

A: Yes. CE marking and other regional compliance packages can be arranged as an option, subject to additional lead time and cost.

Q: What warranty do you provide?

A: We offer a 12-month or 50,000 km warranty, whichever comes first, covering the engine, transmission, axles, and hydraulic hoist. Replacement parts are supplied free of charge during the warranty period.

Q: Is a recommended spare parts kit available?

A: Yes. We offer a one-year wear-parts kit covering filters, brake pads, belts, and hydraulic seals, which can ship with the truck to minimize downtime.

Q: What payment terms do you offer for export orders?

A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.

Hot Tags: box-type dump truck, China box-type dump truck manufacturers, suppliers, factory, 6 Wheel Drive Dump Truck, Box type Dump Truck, Heavy Duty Rear Dump Truck, HOWO Heavy Duty Dump Truck, HOWO TX7 Dump Truck, SHACMAN Delong Dump Truck

Next: No Information

You Might Also Like

(0/10)

clearall