SHACMAN Delong Dump Truck
The SHACMAN F3000 6×4 Dump Truck is engineered for heavy-duty bulk transport in mining, quarrying, and civil infrastructure applications.
Product Introduction
The SHACMAN F3000 6×4 Dump Truck is engineered for heavy-duty bulk transport in mining, quarrying, and civil infrastructure applications. Built on a genuine SHACMAN chassis with a Weichai engine and Fast transmission, it delivers dependable performance on unpaved roads, steep grades, and rugged terrain.
Product Specifications
|
Item |
Specifications |
|
GVW / Curb Weight |
31,000 kg / 12,500 kg |
|
Structural Payload |
18,500 kg |
|
Body Dimensions |
5,600 × 2,300 × 1,500 mm |
|
Body Volume |
Standard: 19.32 m³; Optional: 18–22 m³ |
|
Steel Options |
Q355B structural steel / NM450 wear-resistant steel |
|
Plate Thickness |
Standard: 8 mm floor / 6 mm sides; Mining: 12 mm floor / 8 mm sides |
|
Hydraulic Cylinder |
HYVA multi-stage telescopic; 190 bar nominal pressure |
|
Fuel Consumption |
38–42 L/100 km (quarry cycle reference) |
|
Fuel Tank |
400 L aluminum alloy |
|
Maintenance Interval |
10,000 km or 250 operating hours |
|
Serviceability |
Accessible service points; standard workshop tools |
Engine, Transmission & Gradeability
Engine Specs: Powered by Weichai turbocharged diesels (WP10.380E22 Euro II or WP12 series Euro V), configured to exact factory power and torque curves.
Transmission: Fast 12-speed manual gearbox (12 forward, 2 reverse) featuring high torque-input tolerance and a 15.53 maximum reduction down to a 1.00 direct drive.
Drivetrain: 6×4 configuration with planetary hub-reduction rear axles optimized for high-torque, low-speed traction.
Gradeability: Achieves 32% maximum gradeability at 31,000 kg GVW in 1st gear on compacted gravel inclines under factory test conditions.
Chassis & Off-Road Performance
|
Item |
Specifications |
|
Wheelbase |
3,975 + 1,400 mm |
|
Frame Structure |
850 × 300 mm; 8+7 mm double-layer frame |
|
Front Axle |
9.5 tons |
|
Rear Axles |
Tandem 16-ton planetary reduction axles |
|
Suspension |
Heavy-duty multi-leaf springs; dual hydraulic shock absorbers |
|
Tires |
12.00R20; 10 tires + 1 spare |
|
Ground Clearance |
318 mm (rear axle) |
|
Approach / Departure Angles |
28° / 26° |
Quality Testing
Pre-Delivery Checks: Comprehensive verification covering engine output, gear engagement, steering alignment, and electrical continuity.
Hydraulic Testing: 50-cycle full-elevation dump body lift test at 190 bar maximum pressure to verify cylinder stability and seal integrity.
Brake & Road Test: Roller bench brake testing across all axles, followed by a loaded 5 km road test verifying brake balance and power delivery.
Documentation: Units ship with a Factory Inspection Certificate, Chassis VIN / Engine Serial Match Record, and Hydraulic Pressure Test Report.
Warranty
Terms: 12 months or 60,000 km (whichever occurs first), effective from official port handover as defined in the contract.
Coverage: Powertrain assemblies (engine, gearbox, axles) are covered via Weichai and Fast regional service channels; upper bodies and hydraulics are warranted directly by Shandong Xinyang.
Spare Parts: Fast-moving consumable packages (brake shoes, filters, seals, clutch plates) ship in-container with vehicles. Replacements are dispatched via air/sea freight within 7–15 working days.
Claims Procedure: Submit photo evidence, part serial numbers, and maintenance logs. Engineers review within 24–48 hours to authorize replacement parts or repair compensation.
Market Compliance
Regulatory Adaptation: Configured to regional import requirements, supported by matching emission documentation.
Shipping Documents: Commercial Invoice, Detailed Packing List, Bill of Lading, and Certificate of Origin (Form E/F where applicable).
Inspection Services: Physical vehicle inspections can be coordinated prior to loading to satisfy market mandates (e.g., SONCAP, Intertek, SGS).
Vehicle Condition: 100% new production units with documented build year, VIN details, and zero-meter/factory transport mileage.




FAQ
Q: Which body specification is right for our haul conditions?
A: Choose the standard body for sand, gravel, and general aggregates, and the mining-grade body with NM450 steel for blasted rock and highly abrasive loads.
Q: Can the truck be configured for right-hand drive?
A: Yes. Right-hand drive configurations can be supplied on request for markets that require them.
Q: Can the truck operate in extreme temperatures or at high altitude?
A: Yes. It is rated for operation from -20°C to +45°C and at altitudes up to 2,000 m.
Q: Is CE marking or other regional certification available?
A: Yes. CE marking and other regional compliance packages can be arranged as an option, subject to additional lead time and cost.
Q: Are extended warranty or service contracts available?
A: Yes. Coverage can be extended to 24 months or 120,000 km, with an optional service contract that includes scheduled inspections and priority parts supply.
Q: What are the MOQ and standard lead time?
A: MOQ is 1 unit. Standard lead time is 15 to 25 days from deposit confirmation, depending on body configuration and chassis availability.
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Q: Do you offer driver training and technical support?
A: Yes. We provide remote video training for drivers and maintenance staff, along with operator manuals and a parts catalog. On-site training is available on request.
Hot Tags: shacman delong dump truck, China shacman delong dump truck manufacturers, suppliers, factory, Box type Dump Truck, dump truck, Heavy Duty Rear Dump Truck, HOWO Heavy Duty Dump Truck, HOWO TX7 Dump Truck, SHACMAN Delong Dump Truck
You Might Also Like
Send Inquiry




