Heavy-Duty Rear-Dump Truck
video
Heavy-Duty Rear-Dump Truck

Heavy-Duty Rear-Dump Truck

The 3-Axle Heavy-Duty Rear-Dump Semi-Trailer is designed for bulk-material transport in mining, infrastructure construction, and quarrying.

Product Introduction

The 3-Axle Heavy-Duty Rear-Dump Semi-Trailer is designed for bulk-material transport in mining, infrastructure construction, and quarrying. It features a high-tensile steel dump body and a front-mounted telescopic hydraulic hoist powered by the tractor's PTO. Compatible with 6×4 and 4×2 tractors, it is built to haul abrasive materials such as sand, gravel, crushed stone, and excavation waste.

 

Product Parameters

 

Product Parameter

Specification

Tractor Compatibility

6×4 / 4×2; 380–460 HP

Kingpin

2-inch / 3.5-inch, replaceable

Fifth Wheel

Height: 1,250–1,350 mm; Kingpin Load: 16,000 kg

PTO Requirements

1,000 RPM; 19–22 MPa; 80–100 L/min

Air & Electrical Connections

Dual-line air brakes; 7-pin, 24 V

RDT-30 Dump Body

8,000 × 2,300 × 1,500 mm; 27.6 m³; 30 t

RDT-40 Dump Body

10,000 × 2,300 × 1,800 mm; 41.4 m³; 40 t

Body Plate Thickness

8 mm floor; 6 mm sides, front and tailgate

Hydraulic System

Front-mounted telescopic cylinder; 19–22 MPa

Hydraulic Tank

RDT-30: 150 L; RDT-40: 200 L

Dumping Performance

45°–48°; Raising: 30–45 sec; Lowering: 20–30 sec

Lubrication Interval

Every 5,000 km or 250 operating hours

Wheel Bearing Maintenance

Every 30,000 km

Hydraulic Oil Replacement

Every 1,000 hours or 12 months

Common Spare Parts

Brake shoes, drum linings, pivot bushings, cylinder seal kits

 

Heavy-Duty Construction

 

Main Beam Construction: 500 mm deep welded I-beams with 16 mm top/bottom flanges and an 8 mm web plate in Q345B steel, backed by mill test certificates.

 

Axles & Brakes: Three 13-ton or 16-ton capacity axles (BPW, FUWA, or equivalent) with grease-lubricated hubs and heavy-duty drum brakes.

 

Suspension: 10-leaf mechanical tandem suspension with 90 × 13 mm steel leaf springs and equalizers; air suspension optional.

 

Tires & Rims: Twelve 12R22.5 18PR tubeless commercial tires on 9.0-22.5 steel disc rims, rated for single and tandem load limits.

 

Landing Gear: Two-speed manual landing gear with an 80-ton static load capacity and a 28-ton lift capacity.

 

Working Conditions

 

Loading Compatibility: Built to handle drop loading from wheel loaders (3.0–5.0 m³ bucket capacity) and 20–30-ton hydraulic excavators.

 

Operating Conditions: Suitable for paved highways, unpaved haul roads, and quarry/construction tracks. Components rated for ambient operating temperatures from −20°C to +50°C.

 

Regulatory Compliance: Axle spacing and weight configurations are customizable to meet target-country axle-load and bridge-formula regulations.

 

Braking System & Safety

 

Brake Configuration: Dual-circuit air brake system with 30/30 spring brake chambers on rear axles for parking and emergency braking.

 

ABS System: Standard WABCO (or equivalent) 4S/2M ABS with wheel-speed sensors and modulators to prevent wheel lockup on slick or loose surfaces.

 

Hydraulic Safety: Hydraulic circuit equipped with a pilot-operated check valve, pressure relief valve, and mechanical stroke limiter to prevent over-extension or rapid bed drop.

 

Maintenance Props: Dual mechanical safety prop bars support the raised body during servicing.

 

Manufacturing Process

 

Fabrication & Welding: CNC plasma cutting for web plates and automatic submerged arc welding for main beams, backed by selective NDT (UT/MT) on critical joints.

 

Surface Preparation: Frame shot-blasted to ISO 8501-1 Sa 2.5 cleanliness, primed with zinc-rich epoxy, and finished with a polyurethane topcoat (average dry film thickness ≥ 120 μm).

 

Quality Inspection:

  • Frame & Welds: Dimensional check of chassis and visual inspection of weld seams.
  • Pneumatic Test: 100% air brake pressure test at 0.8 MPa with pressure-hold verification.
  • Hydraulic Test: Full-stroke cylinder pressure and operational test under simulated load.
  • Documentation: Material Mill Test Certificates, Brake Pressure Test Records, and Final Inspection Reports supplied upon delivery.

 

1

product-1200-800

 

Packaging & Shipping

 

Factory Showcase

 

FAQ

 

Q: Is the trailer compatible with our existing tractor?

A: Please share your tractor model, PTO output, and fifth-wheel specifications, and our engineers will confirm compatibility before production.

Q: Which body size is right for our material and haul route?

A: Choose the RDT-30 for dense aggregates and tighter weight limits, and the RDT-40 for lighter, high-volume materials. Share your material type and local axle-load rules, and we will recommend the best fit.

Q: Can the trailer be adapted to local axle-load and road regulations?

A: Yes. We can adjust axle spacing, reflective markings, rear underrun bars, and lighting packages, quoted separately.

Q: Can we inspect the trailer before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a hydraulic and braking test before release.

Q: What are the MOQ and standard lead time?

A: MOQ is 1 unit. Standard lead time is 20 to 30 days from deposit confirmation, depending on body size and configuration.

Q: What warranty do you provide?

A: We offer a 12-month warranty from the Bill of Lading date, covering main beam welds against cracking and the hydraulic hoist against manufacturing defects. Wear parts and damage from overloading are excluded.
Is a recommended spare parts kit available?
Yes. We offer a one-year wear-parts kit covering brake shoes, drum linings, pivot bushings, and cylinder seal kits, which can ship with the trailer.

Q: Is air suspension available for rough or long-distance routes?

A: Yes. Air suspension can be fitted as an option, improving ride quality and reducing cargo and tire wear. It is quoted separately.

Hot Tags: heavy-duty rear-dump truck, China heavy-duty rear-dump truck manufacturers, suppliers, factory, 6 Wheel Drive Dump Truck, dump truck, Heavy Duty Rear Dump Truck, HOWO Heavy Duty Dump Truck, HOWO TX7 Dump Truck, SHACMAN Delong Dump Truck

You Might Also Like

    (0/10)

    clearall