Extendable Low-bed Semi-trailer
video
Extendable Low-bed Semi-trailer

Extendable Low-bed Semi-trailer

The 3-axle extendable low-bed semi-trailer features a high-strength Q355B steel chassis. Built for heavy machinery and long structural cargo, the standard 3-axle layout delivers a 13.5 m base platform and a 24 m fully extended platform.

Product Introduction

The 3-axle extendable low-bed semi-trailer features a high-strength Q355B steel chassis. Built for heavy machinery and long structural cargo, the standard 3-axle layout delivers a 13.5 m base platform and a 24 m fully extended platform.

 

Product Specifications

 

Product Specification

Details

Main Beams

Q355B welded I-beams; 500 mm depth, 160 mm flange width, 20/22 mm flanges, 12 mm web

Crossmembers

Q235B channels, 120 × 60 × 6 mm, spaced at 450 mm; tubular cross-bracing

Joint Reinforcement

16 mm Q355B internal stiffeners and external steel collars

Axles

3 × 13 t FUWA; optional 12 t or 14 t BPW; 1,360 mm spacing

Suspension

10-leaf mechanical springs (90 × 16 mm); optional air suspension

Braking System

Dual-circuit air brakes, WABCO 4S/2M ABS, spring parking brakes, ISO 1728 couplings

Steering Options

Self-steering rear axle or front axle lift

Deck Width

3,000 mm standard; 3,500 mm with outriggers

Deck Height

880 mm laden; 930 mm unladen

Loading Ramps

2,200 × 800 mm; 30,000 kg combined static capacity at 15°

Ground Clearance

320 mm chassis; 260 mm under axle differentials

Tractor Compatibility

6×4 tractor, 420–540 hp; fifth-wheel height 1,250–1,350 mm

Kingpin

Interchangeable 2-inch (50.8 mm) or 3.5-inch (88.9 mm); 20,000 kg max vertical load

Dimensions & Turning Radius

17,500 × 3,000 × 1,750 mm retracted; 14.5 m retracted / 21 m fully extended

 

Extendable Deck Length

 

Platform Dimensions: Retracted deck length is 13.5 m (gooseneck rear bolster to tail), extending to a 24 m maximum deck length. Overall length expands from 17.5 m (retracted) to 28 m (fully extended, kingpin face to rear bumper).

 

Extension Stroke: A single-stage mechanical telescoping box beam provides a 10.5 m total extension stroke with pin-locking stop positions every 1,000 mm (final stop at 10,500 mm).

 

Joint Engagement: The telescoping joint maintains a minimum 2,000 mm inner-to-outer beam overlap at full extension to handle vertical bending moments.

 

Telescopic Extension & Locking System

 

Extension Actuation: Dual manual cranks come standard; a double-acting hydraulic cylinder powered by the tractor PTO or an onboard power pack is optional.

 

Locking Mechanism: Features 8 heavy-duty locking pins (Φ50 mm, 40Cr alloy steel, 4 per side), actuated by pneumatic cylinders. All structural transport loads are borne entirely by the steel pins, backed by secondary manual safety locks.

 

Wear & Guidance: The outer guide box incorporates replaceable 15 mm UHMW-PE slide blocks on vertical faces and brass wear plates on horizontal contact points.

 

Payload Capacity & Load Distribution

 

Payload Ratings: 60,000 kg at 13.5 m retracted length; 50,000 kg at 18 m extended length; 40,000 kg at full 24 m extension (engineering load distribution charts available upon request).

 

Weights & Ratings: Unladen tare weight is approximately 14,000 kg. Maximum kingpin vertical load capacity is 20,000 kg; the 3-axle group carries a 39,000 kg combined component rating (13,000 kg per axle line).

 

Concentrated Loading: Main chassis supports up to 30,000 kg concentrated load across a 3,000 mm central deck span in the retracted position.

 

Load Positioning: Extended long loads require support at two main bearing points within 1,500 mm of the gooseneck bolster and the rear axle center.

 

Quality Control

 

Material Traceability: Structural steel plates include EN 10204 3.1 mill certificates matched to heat numbers stamped on primary frame components, meeting GB/T 1591 specifications.

 

Quality Management: Manufactured under ISO 9001:2015 quality standards within a manufacturing base producing 5,000 special vehicles annually.

 

Pre-Delivery Testing: Factory checks include 100% pneumatic line leak testing (8 bar for 3 minutes, zero pressure drop), 3 full extension-retraction cycles on test jigs, and frame alignment verification.

 

Quality Docs: Mill test reports, UT weld inspection logs, and factory clearance certificates are provided before shipment.

 

Production Process

 

Factory Showcase

 

Packaging & Transportation

 

FAQ

 

Q: What is the MOQ and standard lead time?

A: MOQ is 1 unit. Standard lead time is 25 to 35 days from deposit confirmation and drawing approval, depending on configuration and customization.

Q: Is the trailer compatible with our existing tractor?

A: Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production.

Q: Can the trailer be adapted to local road regulations?

A: Yes. We can adjust axle spacing, overall dimensions, reflective markings, rear underrun bars, and lighting packages, quoted separately.

Q: Is CE marking or other regional certification available?

A: Yes. CE marking and other regional compliance documents can be arranged as an option, subject to additional lead time and cost.

Q: Can we inspect the trailer before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness an extension, braking, and functional test before release.

Q: What warranty do you provide?

A: We offer a 12-month warranty from the Bill of Lading date, covering main beam welds and the telescopic structure against cracking under normal rated use. Tires, brake linings, slide blocks, and damage from overloading are excluded.

Q: Is manual or hydraulic extension better?

A: Manual cranks suit occasional use and keep costs low. For frequent extension or tight turnaround times, choose the hydraulic option.

Q: How do I safely transport long cargo such as wind blades or steel beams?

A: Position the load on the two main bearing points and secure it with the proper lashing gear. We can supply load distribution guidance and support brackets matched to your cargo length and weight.

Hot Tags: extendable low-bed semi-trailer, China extendable low-bed semi-trailer manufacturers, suppliers, factory, Concave beam Low bed Semi trailer, Detachable Low bed Semi trailer, Extendable Low bed Semi trailer, Fixed Low bed Semi trailer, Heavy Haul Low Bed Semi Trailer, Light duty Low bed Semi trailer

You Might Also Like

(0/10)

clearall