Heavy-Haul Low-Bed Semi-Trailer
This heavy-haul low-bed semi-trailer is engineered specifically for oversized, high-capacity transport. Featuring an ultra-low deck profile, high-strength framing, and multi-axle configurations, it helps transport operators and logistics fleets manage payloads ranging from 80 to 200 tons safely and efficiently across long highway hauls and demanding terrain.
Product Introduction
This heavy-haul low-bed semi-trailer is engineered specifically for oversized, high-capacity transport. Featuring an ultra-low deck profile, high-strength framing, and multi-axle configurations, it helps transport operators and logistics fleets manage payloads ranging from 80 to 200 tons safely and efficiently across long highway hauls and demanding terrain.
Product Specifications
|
Product Item |
Key Specifications |
|
Model Range |
XY-80T, XY-120T, XY-200T |
|
Rated Payload |
80t, 100–120t, 150–200t |
|
Axle Configuration |
4 axles, 5 axles, 6 axles or modular multi-axle lines |
|
Axle Rating |
16T per axle for XY-80T and XY-120T configurations |
|
Overall Length |
16,000mm, 18,500mm, 20,500mm |
|
Platform Width |
3,000–3,200mm |
|
Tare Weight |
15t, 18.5t, 23t |
|
Effective Well Deck Length |
8,000–13,000mm |
|
Loading Height |
700–850mm |
|
Main Beam Structure |
Welded I-beams for 80–120t models; closed box-section beams for 150–200t models |
|
Main Beam Material & Dimensions |
Q460 steel; I-beam web height 500–600mm, flange thickness 20–25mm; box beam height 600mm, top/bottom plates 25mm, side plates 20mm |
|
Crossmembers & Reinforcement |
160mm channel steel crossmembers at 400–500mm intervals; reinforcement plates 12–20mm thick |
|
Braking System |
Dual-circuit pneumatic brakes, quick-release valves, emergency relay valves, and spring brake chambers |
|
ABS & Tires |
WABCO or equivalent ABS; 12R22.5 radial tires, load index 152/149, dual-wheel configuration |
|
Landing Gear |
JOST or equivalent two-speed manual landing legs; 28T static load capacity and 14T lifting capacity per pair |
Axle & Suspension
Single Axle Rating: Heavy-duty commercial axles rated at 16T or 20T capacity per axle, featuring reinforced square axle beams and tapered roller bearings.
Suspension System: Heavy-duty multi-leaf mechanical suspension or hydraulic balance suspension designed to maintain even load distribution on uneven surfaces.
Axle Spacing: Standardized commercial grouping intervals of 1,310mm to 1,800mm to align with bridge-formula regulations.
Loading Platform & Deck Design
Deck Configurations: Available in flat deck, step-frame, or concave well-bed layouts to match specific equipment clearance profiles.
Platform Load-Bearing Structure: 4mm to 8mm checkered steel plating supported by underlying longitudinal stringers (100mm channel sections spaced at 300mm intervals) to handle crawler tracks and point loads.
Tie-Down Lashing Points: Heavy-duty anchor D-rings (WLL 10t to 20t working load limit per ring, tested for vertical and lateral pull) spaced at 1,000mm to 1,500mm intervals along side rails.
Side Outriggers: Pull-out or swing-out lateral brackets that extend platform width by 250mm to 300mm per side, rated up to 3 t per outrigger pair.
Gooseneck & Loading System
Gooseneck Options:
- Mechanical Fixed Gooseneck: Rigid front design for standard step-deck operations.
- Hydraulic Detachable Gooseneck: Front-loading configuration allowing the upper gooseneck to disconnect for direct, ground-level front entry of tracked machinery.
Ramp System & Angle: Rear hydraulic folding ramps or spring-assisted mechanical ramps with anti-slip cleats, providing a 10° to 15° loading angle.
Hydraulic Specifications: Powered by an independent engine-driven power unit or tractor PTO pump operating at 16–20 MPa, utilizing multi-stage hydraulic cylinders (110mm bore / 800mm stroke).
Safety Lock Mechanism: Positive mechanical safety pins for secure transit locking, paired with hydraulic locking cylinders dedicated to coupling and uncoupling sequences.
Export Support
Dimensional & Tonnage Adaptation: Deck lengths, well depths, platform widths, and axle counts engineered to comply with target market highway regulations and bridge-load formulas (North American, European, or Southeast Asian standards).
Documentation Packages: Technical data sheets, operation manuals, and third-party pre-shipment inspection reports (such as SGS or BV) available upon request.
Export Delivery: Flexible shipping methods including container stuffing for knocked-down kits, flat-rack shipping, or break-bulk vessel transport for fully assembled units, complete with reassembly instructions.



FAQ
Q: Which model is right for our heaviest cargo?
A: Choose the XY-80T for heavy excavators and mining equipment, the XY-120T for large industrial modules, and the XY-200T for transformers and oversized project cargo.
Q: Is the trailer compatible with our existing tractor?
A: Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production. For 150–200 t loads, we can also advise on suitable heavy-haul prime movers.
Q: Can the trailer be adapted to our local road regulations?
A: Yes. We can adjust axle spacing, overall dimensions, reflective markings, rear underrun bars, and lighting packages, quoted separately.
Q: Can we inspect the trailer before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a braking and functional test before release.
Q: Is mechanical or hydraulic suspension better for our route?
A: Mechanical leaf suspension is cost-effective for paved highways and routine hauls. Hydraulic balance suspension is better for uneven terrain and sensitive cargo.
Q: What are the MOQ and standard lead time?
A: MOQ is 1 unit. Standard lead time is 35 to 50 days from deposit confirmation and drawing approval, depending on axle configuration and payload rating.
Q: What warranty do you provide?
A: We offer a 12-month warranty from the Bill of Lading date, covering main beam welds against cracking under normal rated use. Tires, brake linings, and damage from overloading are excluded.
Q: Is a recommended spare parts kit available?
A: Yes. We offer a one-year wear-parts kit covering brake linings, hub seals, bushings, air couplers, and hydraulic hoses, which can ship with the trailer to minimize downtime.
Hot Tags: heavy-haul low-bed semi-trailer, China heavy-haul low-bed semi-trailer manufacturers, suppliers, factory, Concave beam Low bed Semi trailer, Detachable Low bed Semi trailer, Extendable Low bed Semi trailer, Gooseneck Low bed Semi trailer, Heavy duty Low bed Semi trailer, Integrated Low bed Semi trailer
You Might Also Like
Send Inquiry







