Detachable Low-bed Semi-trailer
The Detachable Low-Bed Semi-Trailer is designed to transport heavy machinery, crawler equipment, and oversized industrial loads. Its hydraulic detachable gooseneck allows equipment to drive directly onto the low deck from the front, reducing the need for steep ramps and improving loading safety.
Product Introduction
The Detachable Low-Bed Semi-Trailer is designed to transport heavy machinery, crawler equipment, and oversized industrial loads. Its hydraulic detachable gooseneck allows equipment to drive directly onto the low deck from the front, reducing the need for steep ramps and improving loading safety. It provides a stable transport platform for infrastructure, mining, and other heavy-haul applications.
Product Specifications
|
Product Item |
Specifications |
|
Steel Grade |
Q355B high-strength structural steel |
|
Main Beam |
Submerged-arc welded I-beams, 500–600 mm high |
|
Flange & Web Thickness |
Flanges: 16–22 mm; webs: 10–14 mm |
|
Crossmember Layout |
I-beam or channel sections at 500 mm intervals, reinforced in high-stress areas |
|
Decking Options |
5 mm steel checker plate or 40 mm hardwood |
|
Engineering Reports |
FEA reports covering stress concentrations and safety margins |
|
Axle Configuration |
40T: 3×13T; 60T: 3×16T; 70T: 4-axle assembly |
|
Axle Brands |
Fuwa or BPW |
|
Suspension |
10-leaf springs, 90 × 16 mm |
|
Tire Sizes |
12R22.5 or 11.00R20 dual tires |
|
Tire Load Rating |
Load Index 152/149J; 3,250 kg per tire in dual fitment; approximately 13T per axle |
|
Braking System |
Dual-circuit air brakes, ABS (Wabco or equivalent), emergency relay valves, and spring parking brakes on all axles |
Detachable Gooseneck Loading
Front-Loading Access: Dropping the front lip of the deck creates a shallow entry angle, letting tracked equipment drive straight onto the trailer without auxiliary rear ramps.
Hydraulic Separation Sequence: Twin support legs extend to ground level (or tractor frame pads) to relieve joint tension, allowing hydraulic cylinders to retract the lock pins and lower the deck.
Support Leg Capacity: Twin hydraulic legs deliver a 30-ton static lift capacity with a 450 mm stroke.
Reconnection & Alignment: Tapered guide pins assist visual alignment during reverse coupling. Hydraulic cylinders pull the frame into position before lock pin engagement, which is verified by visual indicators and safety retention pins.
Hydraulic System & Gooseneck Locking Mechanism
Power Options: Powered via tractor PTO wet kit or an optional 12 kW auxiliary diesel engine pack (2200 RPM).
System Hydraulics: Operating pressure is set at 18 MPa (relief valve at 20 MPa) with a 60 L fluid reservoir. Drives two double-acting lift cylinders (110 mm bore / 70 mm rod / 400 mm stroke) and two support leg cylinders.
Mechanical Safety Lock: Twin forged alloy steel pins (50 mm diameter) mechanically lock the gooseneck to the deck independently of hydraulic line pressure.
Line Protection: High-pressure hoses (burst rated to 35 MPa) feature quick-disconnect couplings with check valves to prevent fluid loss during uncoupling.
Loading Deck Dimensions
Loaded Deck Height: Platform height ranges from 800 mm to 950 mm under full payload, measured from the ground to the top deck surface.
Front Loading Angle: Features a 6° to 8° deck entry angle to prevent underside scraping; minimum ground clearance is 200 mm under full load.
Usable Deck Width: Standard deck width is 3000 mm. Optional swing-out outriggers extend usable width up to 3400 mm for wide-track machinery under distributed loads.
Gooseneck Clearance: Fits standard 4x2 and 6x4 tractors with fifth-wheel saddle heights between 1250 mm and 1350 mm, maintaining standard cab swing clearance.
Customization Options
Chassis & Axles: 2-axle, 3-axle, 4-axle, and multi-axle bogie layouts can be tailored to meet local road bridge formulas.
Deck Customization: Custom platform lengths, deck widths, and recessed track wells (for low-clearance excavators) are available during engineering design.
Auxiliary Equipment: Options include 20-ton WLL tie-down D-rings, swing-out outriggers, and lockable toolboxes. (Front-loading detachable models omit rear hydraulic ramps).
Component Specs: Specify axle brands (Fuwa/BPW), landing gear (JOST), ABS modules (Wabco), or tire brands to match your fleet standards.



FAQ
Q: Which axle configuration is right for our heaviest load?
A: Choose the 3×13T layout for mid-size excavators and loaders, the 3×16T for larger crawler machines, and the 4-axle for heavy equipment.
Q: Is the trailer compatible with our existing tractor?
A: Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production.
Q: Is the detachable design right for our operation, or is a fixed-gooseneck model sufficient?
A: Choose the detachable design when you load tracked equipment frequently or need to avoid steep rear ramps. For occasional use or tighter budgets, a fixed-gooseneck model may be more cost-effective.
Q: Which hydraulic power option should we choose?
A: The tractor PTO option keeps costs low and suits trucks already equipped with a wet kit. The auxiliary diesel pack suits tractors without a PTO or sites where the tractor is not available during loading.
Q: Can we inspect the trailer before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a gooseneck detachment, braking, and functional test before release.
Q: What are the MOQ and standard lead time?
A: MOQ is 1 unit. Standard lead time is 25 to 35 days from deposit confirmation and drawing approval, depending on axle configuration and customization.
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Hot Tags: detachable low-bed semi-trailer, China detachable low-bed semi-trailer manufacturers, suppliers, factory, Concave beam Low bed Semi trailer, Extendable Low bed Semi trailer, Flat deck Low bed Semi trailer, Integrated Low bed Semi trailer, Light duty Low bed Semi trailer, Lightweight Low bed Semi trailer
You Might Also Like
Send Inquiry







