Integrated Low-bed Semi-trailer
The integrated low-bed semi-trailer features a fixed, one-piece chassis built for long-haul transport of heavy machinery, including excavators, bulldozers, and wheel loaders.
Product Introduction
The integrated low-bed semi-trailer features a fixed, one-piece chassis built for long-haul transport of heavy machinery, including excavators, bulldozers, and wheel loaders. The continuous low deck enables equipment to drive directly onto the platform via rear ramps, delivering a straightforward, low-maintenance solution for heavy equipment logistics.
Product Specifications
|
Product Specifications |
Details |
|
Deck Dimensions |
11–13.5m length; 2,900mm width |
|
Deck Height |
950mm unladen, measured at platform midpoint |
|
Machinery Capacity |
Up to 45t; excavators, dozers, and road rollers |
|
Track Compatibility |
Up to 2,600mm track gauge; 600mm minimum shoe width |
|
Side Outriggers |
Optional; 5t capacity per pair |
|
Axle Configuration |
2 axles for 33t models; 3 axles for 45t models |
|
Axle & Brakes |
13t-rated axles; 420 × 180mm brake drums |
|
Suspension |
Mechanical leaf springs; 10 leaves per hanger assembly |
|
Axle Spacing |
1,310mm tandem; 1,360mm tri-axle |
|
Tires & Rims |
11.00R20 / 12.00R20 tires; 8.0-20 / 8.5-20 rims |
|
Axle Brands |
Fuwa or BPW |
|
Braking System |
Dual-line air brakes; T30/30 chambers; 4S/2M ABS |
|
Lighting & Wiring |
24V sealed harness, waterproof connectors, LED lights |
|
Coupling & Landing Gear |
2-inch / 3.5-inch kingpin; 18t vertical load; 28t landing-leg capacity per pair |
Payload Ratings
Configuration-Based Capacity: 2-axle models are rated for 33t payload; 3-axle models support up to 45t payload under standard road conditions.
Axle & Kingpin Distribution: Heavy-duty 13t design-capacity axles (26t group rating for 2-axle; 39t for 3-axle) pair with an 18t allowable vertical kingpin load.
Tare & Gross Weight: Unladen weight is 9.5t (2-axle) and 11.2t (3-axle), yielding gross trailer weight (GTW) ratings of 42.5t and 56.2t.
Concentrated Loading: The main frame supports concentrated equipment weight over a minimum single-track contact length of 3.0m.
Structural Engineering
Monolithic Frame: Fully welded chassis integrating the gooseneck, longitudinal beams, and rear deck into a continuous structural frame.
Main Beam Profile: Fabricated from Q355B steel using 500mm deep web plates (10mm thick) with 16mm top and 18mm bottom flanges.
Crossmember Support: Heavy-duty 160mm channel crossmembers set at 350mm center-to-center spacing, reinforced with gussets at hanger zones.
Ramps & Securement System
Ramp Configuration: Dual mechanical spring-assisted rear ramps supplied as standard, with loading angle tailored to project specifications.
Ramp Capacity: Individual ramps rated for 30 t static loading, assisted by dual heavy coil springs and secured with transit locking pins.
Lashing Points: 12 to 18 heavy-duty forged lashing rings along side beams, each with a 10t Working Load Limit (WLL).
Traction & Surface: Deck surfaced with 4mm checkered steel plate and cross-welded traction bars over the rear ramp transition slope.
Customization Service
Application Engineering: Trailer specifications are adjusted during engineering design based on client machinery dimensions, axle load limits, and route requirements.
Dimensional Customization Boundaries: Main deck length (11m to 14m) and deck widths are customizable within legal regional road transport limits.
Component Selection Options: Optional specification of alternative axle brands, suspension variants, tire ratings, and electrical connectors upon request.
Quality Control
NDT Inspection: Main beam butt welds undergo 100% visual inspection and Ultrasonic Testing (UT) for internal defect verification.
Alignment Checks: Optical laser tools verify frame squareness, axle parallelism, and deck flatness before coating.
Factory Acceptance: Every trailer undergoes air pressure hold testing, ramp function checks, and electrical circuit audits.
Quality Deliverables: MTC copies, inspection sheets, and certificate of conformity are included in shipping documentation.



FAQ
Q: Should we choose the 2-axle or 3-axle model?
A: Choose the 2-axle model for compact excavators and loaders up to roughly 30 tons. Choose the 3-axle model for heavier crawler machines and bulldozers.
Q: Is the trailer compatible with our existing tractor?
A: Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production.
Q: Can the trailer be adapted to our local road regulations?
A: Yes. We can adjust axle spacing, overall dimensions, reflective markings, rear underrun bars, and lighting packages, quoted separately. Please share your national requirements before ordering.
Q: Can we inspect the trailer before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a braking and functional test before release.
Q: What are the MOQ and standard lead time?
A: MOQ is 1 unit. Standard lead time is 20 to 30 days from deposit confirmation, depending on axle configuration and customization.
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Q: What warranty do you provide?
A: We offer a 12-month warranty from the Bill of Lading date, covering main beam welds against cracking under normal rated use. Tires, brake linings, and damage from overloading are excluded.
Q: Can the trailer be shipped in a way that reduces freight cost?
A: Yes. The rear ramps can be separated and the trailer secured to meet the dimensional limits of Ro-Ro or flat-rack shipping, helping lower per-unit freight cost.
Hot Tags: integrated low-bed semi-trailer, China integrated low-bed semi-trailer manufacturers, suppliers, factory, Detachable Low bed Semi trailer, Extendable Low bed Semi trailer, Heavy duty Low bed Semi trailer, Light duty Low bed Semi trailer, low bed semi trailer, Multi axle Low bed Semi trailer
You Might Also Like
Send Inquiry









