Heavy-duty Low-bed Semi-trailer
video
Heavy-duty Low-bed Semi-trailer

Heavy-duty Low-bed Semi-trailer

These heavy-duty low-bed semi-trailers are designed to transport construction machinery, mining equipment, and industrial loads across demanding routes and job sites.

Product Introduction

These heavy-duty low-bed semi-trailers are designed to transport construction machinery, mining equipment, and industrial loads across demanding routes and job sites. They provide a low platform height that helps maintain a lower center of gravity, improve stability during transport, and meet overhead clearance requirements.

 

Product Parameters

 

Product Parameter

Specification

Load Distribution

50/50; load shift ≤±5%

Dimensions

Length: 13–16 m; deck: 8.5–11.5 m; width: 3 m

Ground Clearance

Minimum 250 mm

Concentrated Load

60 tonnes static load

Machinery Compatibility

50–80 tonne excavators and heavy equipment

Tires

11.00R20 or 235/75R17.5

Braking System

Dual-line air brakes with Wabco ABS

Tractor Compatibility

6×4 / 8×4; 50 mm or 90 mm kingpin

Axle Spacing

1,310 mm

 

Mass & Load Distribution

 

Parameter

3-Axle Configuration (3 × 16T)

4-Axle Configuration (4 × 16T)

4-Axle Heavy Configuration (4 × 20T)

Trailer Tare Weight

11.5 tonnes

14.0 tonnes

16.0 tonnes

Maximum Payload

60.0 tonnes

75.0 tonnes

94.0 tonnes

Trailer Gross Vehicle Weight (GVW)

71.5 tonnes

89.0 tonnes

110.0 tonnes

Kingpin Vertical Load

23.5 tonnes (32.9% GVW)

25.0 tonnes (28.1% GVW)

30.0 tonnes (27.3% GVW)

Axle Group Total Load

48.0 tonnes (67.1% GVW)

64.0 tonnes (71.9% GVW)

80.0 tonnes (72.7% GVW)

Axle Group Rated Capacity

48.0 tonnes

64.0 tonnes

80.0 tonnes

Recommended Tractor Fifth-Wheel Rating

≥ 25.0 tonnes

≥ 28.0 tonnes

≥ 32.0 tonnes

 

Structural Frame

 

Main Beam Profile: Dual I-beam construction with 520 mm beam depth. Features a 20 mm Q460 top flange, 22 mm Q460 bottom flange, and 12 mm Q460 web plate.

 

Reinforcement Zones: High-stress transitions-including the gooseneck radius, main-deck junction, and suspension hanger mounts-are reinforced with 10 mm web doubler plates.

 

FEA Analysis: Finite Element Analysis under a 1.2× dynamic load model indicates a peak von Mises stress of 312 MPa at the gooseneck curve. Evaluated against the 440 MPa flange yield strength, this delivers a 1.41 yield-based safety factor.

 

Loading & Unloading Performance

 

Ramp Geometry: Dual rear ramps (800 mm wide each, 1,000 mm center gap). At an 850 mm deck height, 3,000 mm ramps form an approx. 16° incline (approx. 13° with optional 3,800 mm hydraulic ramps).

 

Hydraulic Ramps: Dual-cylinder hydraulic drive operates at 18 MPa working pressure via tractor PTO or an auxiliary 5.5 kW diesel power pack. Ramps support up to 60 tonnes static loading (30 tonnes per lane).

 

Safety Lockouts & Support: Includes mechanical transport lock pins and fold-down rear landing legs rated for 40 tonnes combined static support to eliminate rear-end compression during equipment loading.

 

Deck Traction: 5 mm chequered deck plate with 10 × 10 mm square steel anti-slip bars welded every 200 mm along the rear incline.

 

Securement Points: 12 to 16 forged steel D-rings welded along the side beams, each rated at 10,000 kg (10T) Working Load Limit (WLL).

 

Custom Configuration

 

Custom Deck Options: Available with deck extensions up to 12.0 m, wheel wells, or manual swing-out brackets (extending deck width from 3,000 mm to 3,500 mm; 250 mm per side, rated at 2.5 tonnes static load per bracket at 1.0 m spacing for overhang support).

 

Removable Gooseneck (RGN): Optional hydraulic RGN system with dual lift cylinders and pin-lock connections for front-loading low-clearance equipment like asphalt pavers.

 

Engineering Review: Custom units are designed from client machine datasheets (weight, center of gravity, track dimensions, and ground clearance) to generate factory production CAD drawings.

 

Delivery Support

 

Lead Time: 20–25 working days for standard models; 30–35 days for custom RGN models.

 

Shipping: Ro-Ro or bulk vessel. Protective wax coating included. 40ft Flat Rack shipping is subject to dimensional approval.

 

Documents: Commercial Invoice, Packing List, Bill of Lading, Certificate of Origin, VIN records, and Factory Test Certificates.

 

Warranty: 12-month structural frame warranty from destination port arrival, covering main beam welds under rated conditions. Replacement wear parts are available by express shipment or onboard packing.

 

Production process

 

Company Showcase

 

Packaging & Shipping

 

FAQ

 

Q: Which axle configuration is right for our heaviest machine?

A: Choose the 3-axle for machines up to 60 tons, the 4×16T for 75-ton class equipment, and the 4×20T for the heaviest loads.

Q: Is the trailer compatible with our existing tractor?

A: Please share your tractor model, fifth-wheel rating, and kingpin size, and our engineers will confirm compatibility before production.

Q: Can the trailer be adapted to our local road regulations?

A: Yes. We can adjust axle spacing, overall dimensions, reflective markings, rear underrun bars, and lighting packages, quoted separately.

Q: Is the standard model or the removable gooseneck better for our loading routine?

A: Choose the standard model for rear-ramp loading at established yards. Choose the removable gooseneck for front loading of low-clearance equipment such as pavers.

Q: Can we inspect the trailer before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a braking and functional test before release.

Q: Is air suspension available for long-distance routes?

A: Yes. Air suspension is available as an option, improving ride quality and reducing cargo and tire wear. It is quoted separately.

Q: Is CE marking or other regional certification available?

A: Yes. CE marking and other regional compliance documents can be arranged as an option, subject to additional lead time and cost.

Q: Is a recommended spare parts kit available?

A: Yes. We offer a one-year wear-parts kit covering brake linings, hub seals, bushings, air couplers, and hydraulic hoses, which can ship with the trailer.

Hot Tags: heavy-duty low-bed semi-trailer, China heavy-duty low-bed semi-trailer manufacturers, suppliers, factory, Detachable Low bed Semi trailer, Flat deck Low bed Semi trailer, Heavy Haul Low Bed Semi Trailer, Integrated Low bed Semi trailer, Light duty Low bed Semi trailer, Lightweight Low bed Semi trailer

You Might Also Like

(0/10)

clearall