Light-duty Low-bed Semi-trailer
video
Light-duty Low-bed Semi-trailer

Light-duty Low-bed Semi-trailer

This light-duty low-bed semi-trailer is designed to transport small- and medium-sized construction and industrial equipment. Its low loading platform makes loading easier, while the standard 2,500 mm deck width is suitable for roads where this dimension meets local regulations.

Product Introduction

This light-duty low-bed semi-trailer is designed to transport small- and medium-sized construction and industrial equipment. Its low loading platform makes loading easier, while the standard 2,500 mm deck width is suitable for roads where this dimension meets local regulations.

 

Product Specifications

 

Product Specifications

Details

Rated Payload Capacity

20–30 t

Tare Weight

6,500–7,500 kg

Gross Vehicle Weight

26,500–37,500 kg

Kingpin Vertical Load

12,000 kg

Dual-Axle Group Design Load

13,000 kg per axle

Deck Dimensions

Length: 9,000–12,000 mm; Standard Width: 2,500 mm

Loaded Deck Height

750–850 mm

Overall Dimensions

Length: 11–14 m; Width: 2,500 mm

Loaded Ground Clearance

300–350 mm

Axle Configuration

2 × 13T axles; Fuwa standard, BPW optional

Suspension System

10-leaf mechanical suspension; 90 mm wide × 16 mm thick

Tyres & Rims

8 × 11.00R20 or 12R22.5 tyres; Load Index 148/145

Braking System

Dual-circuit pneumatic drum brakes; WABCO 4S/2M ABS standard, EBS optional

Brake Components

Type 30/30 spring brake chambers; 220 mm brake linings; 420 mm brake drums

Electrical & Maintenance

24V system; 7-pin ISO 1185 connector; recommended lubrication every 5,000 km

 

Compatible Applications

 

Compatible Equipment: Tailored for hauling compact excavators (e.g., 6t to 15t operating weight class), small wheel loaders, skid-steer loaders, and forklifts.

 

Track & Wheel Compatibility: Deck floor structure supports high-concentration loads from steel-tracked machinery and rubber-tired equipment.

 

Typical Transport Scenarios: Ideal for construction site equipment transfers, machinery rental fleet delivery, and regional equipment logistics.

 

Structural Design

 

Main Beam Material: Fabricated using Q345B high-strength low-alloy structural steel plates backed by mill material test certificates.

 

Main Beam Dimensions: I-beam primary longitudinal members utilize a web height of 450mm to 500mm, web thickness of 8mm to 10mm, and top/bottom flange thicknesses of 14mm to 16mm.

 

Crossmember Structure: Channel-section crossmembers (100mm height) spaced at 500mm intervals, passing through the main beam web to resist torsional twist.

 

Welding Process: Critical structural seams welded via semi-automated CO2 gas-shielded welding by certified operators; load-bearing welds undergo visual and magnetic particle inspection (MPI).

 

Corrosion Protection: Shot-blasted to Sa2.5 profile standard, coated with a high-build epoxy zinc-rich primer and a polyurethane topcoat.

 

Loading Ramps & Loading Operation

 

Ramp Type: Configured with heavy-duty manual spring-assist foldable ramps as standard (hydraulic assist available as an optional upgrade).

 

Ramp Dimensions: Standard ramp length of 2,000mm and width of 550mm.

 

Loading Angle: Engineered to provide an effective ramp inclination angle of approximately 14° to 16° for smooth equipment boarding.

 

Ramp Load Capacity: Rated for a safe working load of 15 t per pair, designed for concentrated machine crawler loading.

 

Anti-slip Design: Fitted with high-traction transverse flat-bar cleats and positive mechanical transport locking hooks.

 

Load Securing

 

Lashing Points: Heavy-duty swing-type lashing rings (rated at 5 working load limit each) welded at 1.5-meter intervals along both outer deck edges.

 

Tie-down Arrangement: Deck layout optimized for multi-point chain lashing of tracked excavators and wheel chocking for wheeled loaders.

 

Wheel Stops: Optional bolt-on steel wheel positioning blocks to prevent longitudinal shifting during transport.

 

Mechanical Safety Supports: Includes dedicated mechanical swing-down support props beneath the rear deck section to stabilize the frame during heavy machinery loading.

 

Road Safety Equipment: Outfitted with side lateral underrun protection guards, ECE-compliant rear chevron reflective hazard plates, and contour marking tape.

 

Quality Inspection

 

Material Inspection: Raw steel plates undergo incoming dimensional checks, thickness verification, and mill certificate traceability audits.

 

Welding Inspection: Primary chassis and main beam butt welds undergo mandatory visual inspection and random ultrasonic or magnetic particle non-destructive testing (NDT).

 

Production Quality Control: Step-by-step quality checkpoints are verified across frame assembly, axle alignment calibration, and suspension mounting.

 

Final Inspection: Pre-delivery audit covering static dimensional checks, pneumatic braking pressure response tests, electrical continuity verification, and final compliance sign-off.

 

Production Process

 

Factory Showcase

 

Partner Clients

 

FAQ

 

Q: Is this trailer the right size for our equipment?

A: This model suits compact excavators, small wheel loaders, skid-steer loaders, and forklifts. For machines above 15 tons, a heavier-duty model is recommended.

Q: Is the trailer compatible with our existing tractor?

A: Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production.

Q: Can the trailer be adapted to our local road regulations?

A: Yes. We can adjust axle spacing, overall dimensions, reflective markings, rear underrun bars, and lighting packages, quoted separately.

Q: Can the deck be widened or extended for our machines?

A: Yes. Deck length and width can be adjusted within your local road transport limits, and wheel stops can be added to secure wheeled equipment.

Q: Can we inspect the trailer before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a braking and functional test before release.

Q: What are the MOQ and standard lead time?

A: MOQ is 1 unit. Standard lead time is 15 to 25 days from deposit confirmation, depending on configuration and customization.

Q: What payment terms do you offer for export orders?

A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.

Q: What warranty do you provide?

A: We offer a 12-month warranty from the Bill of Lading date, covering main beam welds against cracking under normal rated use. Tires, brake linings, and damage from overloading are excluded.

Hot Tags: light-duty low-bed semi-trailer, China light-duty low-bed semi-trailer manufacturers, suppliers, factory, Detachable Low bed Semi trailer, Extendable Low bed Semi trailer, Fixed Low bed Semi trailer, Gooseneck Low bed Semi trailer, Heavy duty Low bed Semi trailer, Heavy Haul Low Bed Semi Trailer

You Might Also Like

(0/10)

clearall