Fixed Low-bed Semi-trailer
This Fixed Low-Bed Semi-Trailer is designed to transport mid-sized crawler excavators, bulldozers, wheel loaders, and other heavy equipment. Its high-strength steel frame provides a low deck height for improved overhead clearance while maintaining structural stability during transport.
Product Introduction
This Fixed Low-Bed Semi-Trailer is designed to transport mid-sized crawler excavators, bulldozers, wheel loaders, and other heavy equipment. Its high-strength steel frame provides a low deck height for improved overhead clearance while maintaining structural stability during transport.
Technical Specifications
|
Product Specifications |
Details |
|
Main Deck Length |
8.5–9.5 m, excluding gooseneck incline and rear ramp transition |
|
Platform Width |
2,550 mm standard; expandable to 3,000 mm |
|
Laden Deck Height |
850–950 mm under full rated payload |
|
Minimum Ground Clearance |
250 mm under maximum payload, measured at the lowest crossmember |
|
Axle Configuration |
3-axle bogie with 13t or 16t technical axle ratings |
|
Payload Options |
40t, 50t, and 60t configurations with matched axle and suspension specifications |
|
Axle Brands |
FUWA standard; BPW and SAF-HOLLAND optional |
|
Suspension Type |
Heavy-duty mechanical leaf spring suspension |
|
Leaf Spring Configuration |
10 or 12 leaves, 13 mm thick per leaf |
|
Axle Spacing |
1,310 mm center-to-center |
|
Tractor Compatibility |
6×4 or 6×2 heavy-duty tractor units |
|
Fifth-Wheel Height |
1,250–1,350 mm |
|
Kingpin Options |
2-inch (50.8 mm, ISO 337) or 3.5-inch (88.9 mm, ISO 4086) |
|
Kingpin Vertical Load |
15,000–20,000 kg, depending on payload configuration |
Payload Capacity
Rated Payload Configurations: Available in 40-tonne, 50-tonne, and 60-tonne payload ratings, matched to specific structural scantlings, axle capacities, and tire load indexes.
Machinery Compatibility: Designed for mid-sized crawler excavators (up to 45-tonne operating weight), medium bulldozers (CAT D6/D7 class), wheel loaders, and industrial modules.
Concentrated Point Load: Engineered to support up to 30 tonnes of track-shoe point loading distributed across a designated 3-meter center deck section.
Equipment Footprint: Accommodates machinery with track or wheel footprints up to 9.5 meters in total length and 3,000mm in overall operating width via extended outriggers.
Weight Distribution: Tare weight ranges from 8.5 to 10.2 tonnes; gross vehicle weight (GVW) is distributed between the tractor fifth wheel and trailer axle group per statutory weight limits.
Main Chassis Structure & Load-Bearing Design
Main Beam Profile: Submerged-arc welded I-beam design featuring a 500mm web depth, uniform 140mm top and bottom flange widths, 16mm top flange, 18mm bottom flange, and 10mm web plate.
Steel Specification: Fabricated using Q355B low-alloy structural steel for primary longitudinal girders and high-stress frame connection points, backed by Mill Test Certificates (MTC).
Crossmember Layout: Channel-section crossmembers spaced at 350mm to 400mm intervals to provide structural support across the deck and resist localized point-load deflection.
Stress Management: Double-tapered gooseneck transition zone engineered with reinforced web plates to manage stress transfer between the tractor kingpin and main platform.
Frame Reinforcement: Gusset plates and reinforcing collars welded at main-beam junctions and suspension hanger mounts to maintain rigid structural alignment.
Cargo Securing System
Ramp Specifications: Rear heavy-duty dual mechanical folding ramps, 600mm wide each, with an extended overall length of 2,500mm to achieve a manageable loading incline.
Operation & Safety: Features manual spring-assisted lifting mechanisms and positive mechanical safety locks to secure ramps in the vertical position during transit.
Lashing Points: Equipped with 8 to 12 forged D-rings welded along side beams, each rated with a Working Load Limit (WLL) of 10 tonnes (100 kN).
Deck Flooring: Main deck surfaced with 4mm to 5mm anti-slip checkered steel floor plating designed to withstand crawler track friction.
Ramp Capacity: Engineered to support crawler track drive-on point loads up to 30 tonnes combined per loading cycle.



FAQ
Q: Which payload rating is right for our equipment?
A: Choose the 40-ton model for mid-size excavators and loaders, the 50-ton model for larger loaders and medium bulldozers, and the 60-ton model for heavier crawler excavators.
Q: Is the trailer compatible with our existing tractor?
A: Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production.
Q: Can the trailer be adapted to our local road regulations?
A: Yes. We can adjust axle spacing, overall dimensions, reflective markings, rear underrun bars, and lighting packages, quoted separately.
Q: Can we inspect the trailer before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and witness a braking and functional test before release.
Q: What are the MOQ and standard lead time?
A: MOQ is 1 unit. Standard lead time is 20 to 30 days from deposit confirmation, depending on payload rating and customization.
Q: What warranty do you provide?
A: We offer a 12-month warranty from the Bill of Lading date, covering main beam welds against cracking under normal rated use. Tires, brake linings, and damage from overloading are excluded.
Q: Can the trailer be shipped in a way that reduces freight cost?
A: Yes. The ramps can be separated and the trailer secured to meet the dimensional limits of Ro-Ro or flat-rack shipping, helping lower per-unit freight cost.
Q: Is CE marking or other regional certification available?
A: Yes. CE marking and other regional compliance documents can be arranged as an option, subject to additional lead time and cost.
Hot Tags: fixed low-bed semi-trailer, China fixed low-bed semi-trailer manufacturers, suppliers, factory, Concave beam Low bed Semi trailer, Extendable Low bed Semi trailer, Gooseneck Low bed Semi trailer, Heavy duty Low bed Semi trailer, low bed semi trailer, Multi axle Low bed Semi trailer
You Might Also Like
Send Inquiry






