Lightweight Low-bed Semi-trailer
video
Lightweight Low-bed Semi-trailer

Lightweight Low-bed Semi-trailer

This Lightweight Low-Bed Semi-Trailer is designed to reduce tare weight while maximizing legal payload capacity.

Product Introduction

This Lightweight Low-Bed Semi-Trailer is designed to reduce tare weight while maximizing legal payload capacity. With an unladen deck height of 880 mm, it is well suited for transporting light- to medium-duty construction equipment, including 10–25-ton excavators, wheel loaders, and compact rollers, between regional highways and job sites.

 

Product Specifications

 

Product Specifications

Key Details

Overall & Deck Length

10,500 / 13,000 mm overall; 6,500 / 9,000 mm deck

Deck Width

2,500 mm standard; expandable to 3,000 mm

Deck Height

880 mm unladen; 780 mm fully loaded

Ground Clearance

250 mm at axle; 380 mm under main deck

Equipment Capacity

15–25 ton machinery; CAT 320 / Komatsu PC200

Main Beam

480–500 mm deep; 10 mm web, 14 mm top flange, 16 mm bottom flange

Steel Material

Q355B; yield strength ≥355 MPa for thickness ≤16 mm

Weld Inspection

UT and MPI testing on primary longitudinal butt welds

Axle Configuration

2 or 3 × 13,000 kg axles; FUWA F2400 or BPW ECO Plus

Axle Capacity

26,000 kg (2-axle); 39,000 kg (3-axle)

Tire Options

8.25R20 (LI 139/137) or 235/75R17.5 (LI 143/141L), dual fitment

Suspension

10-leaf mechanical suspension; 90 × 13 mm leaves

Braking System

Dual-circuit air brakes, WABCO relay valves, T30/30 chambers, ISO 1185 and ISO 7638 connectors

 

Lightweight Design & Payload Efficiency

 

Tare Weight & Axle Options: Base 2-axle unit (10.5 m overall / 6.5 m deck) starts at 5,800 kg tare weight; 3-axle variant (13.0 m overall / 9.0 m deck) starts at 7,200 kg.

 

Payload Capacity: Rated for up to 24,200 kg payload on 2-axle models and up to 37,800 kg on 3-axle models within specified gross weight limits.

 

GVW Rating: Maximum Gross Vehicle Weight is rated at 30,000 kg (2-axle) and 45,000 kg (3-axle), distributed between the axle bogie and tractor kingpin.

 

Tare Weight Optimization: Weight reduction is achieved using high-yield Q355B steel webs, punched cross-members, and high-tensile structural profiles without reducing structural safety margins.

 

Loading Ramps

 

Gooseneck Rating: Heavy-duty fixed gooseneck with a maximum design vertical kingpin load of 15,000 kg (actual operating load governed by tractor specs and axle limits).

 

Rear Ramps: Mechanical rear ramps measure 2,100 mm in working length and 600 mm in width, constructed from high-strength channel steel rated for 30 t combined passage load.

 

Loading Incline: Rear transition profile and ramp geometry provide a manageable drive-on slope for tracked and wheeled equipment.

 

Ramp Operation: Dual-spring manual assist comes standard; hydraulic ramp positioning is available as an option.

 

Lashing Points: 6 to 8 heavy-duty forged D-rings per side along the outer frame for equipment tie-down.

 

Tractor Matching

 

Dimensions: 10,500 mm (2-axle) or 13,000 mm (3-axle) overall length; 2,500 mm standard road width.

 

Fifth-Wheel Coupling: Compatible with tractor fifth-wheel heights from 1,250 mm to 1,350 mm. Fits interchangeable 2-inch (50#) or 3.5-inch (90#) SAE kingpins.

 

Air & Electrical Connections: Dual ISO 1728 palm air couplings (red/yellow), ISO 1185 7-pin power socket, and ISO 7638 EBS receptacle.

 

Compliance Documentation: Vehicle Type Approval, Certificate of Origin, and third-party weight verification documents provided per market requirements.

 

Customization & Engineering Options

 

Dimensions: Deck length tailored from 6,000 mm to 9,500 mm; manual side outriggers (+250 mm per side) available for wider decks.

 

Ramp & Gooseneck Upgrades: Optional hydraulic detachable gooseneck (front loading) or hydraulic rear ramps powered by an onboard power unit.

 

Component Brands: Optional FUWA/BPW axles, air suspension setups, custom tires, kingpins, and landing legs.

 

Accessories: Optional lockable steel toolboxes, spare tire carriers, stake pockets, and hardwood deck inserts.

 

Delivery Support

 

Lead Times: 20 to 25 calendar days for standard builds; 35 to 45 calendar days for custom builds, calculated from deposit receipt and drawing approval.

 

Shipping Methods: Shipped via RORO, breakbulk, or flat-rack container arrangements based on port capabilities.

 

Documentation: Commercial Invoice, Packing List, Clean On Board Bill of Lading, Certificate of Origin (Form E, CO), and destination certificates supplied.

 

Warranty: 12-month or 50,000 km warranty (whichever comes first) on main beam frame welds against cracking under rated loads, effective from port handover.

 

Parts & Support: Standard wear items (brake shoes, air chambers, leaf springs) shipped via courier; 24/7 remote technical support available.

 

Production Process

 

Factory Showcase

 

FAQ

 

Q: Is the trailer compatible with our existing tractor?

A: Yes. Please share your tractor model, fifth-wheel capacity, and kingpin size, and our engineers will confirm compatibility before production.

Q: Can the trailer be adapted to our local road regulations?

A: Yes. We can retrofit ABS, reflective markings, rear underrun bars, and local lighting packages, quoted separately.

Q: Can we inspect the trailer before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the trailer at our factory and review the final inspection report before release.

Q: What payment terms do you offer for export orders?

A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.

Q: What minimum order quantity applies?

A: MOQ is 1 unit.

Q: Can I mix 2-axle and 3-axle models in one order?

A: Yes. Mixed configurations can be combined in a single order and shipment.

Q: Is a recommended spare parts kit available?

A: Yes. We offer a one-year wear-parts kit covering brake linings, hub seals, bushings, air couplers, and tires, which can ship with the trailer.

Hot Tags: lightweight low-bed semi-trailer, China lightweight low-bed semi-trailer manufacturers, suppliers, factory, Concave beam Low bed Semi trailer, Detachable Low bed Semi trailer, Extendable Low bed Semi trailer, Integrated Low bed Semi trailer, Lightweight Low bed Semi trailer, low bed semi trailer

Next: No Information

You Might Also Like

(0/10)

clearall