High-Torque Wheel Loader
This is a heavy-duty wheel loader powered by a 130 HP (97 kW) Weichai industrial engine, paired with a 13,200 kg operating weight and a standard 3.8 m³ general-purpose bucket.
Product Introduction
This is a heavy-duty wheel loader powered by a 130 HP (97 kW) Weichai industrial engine, paired with a 13,200 kg operating weight and a standard 3.8 m³ general-purpose bucket. Engineered for aggregate quarries, construction sites, and bulk yards, it delivers verified breakout force and traction for continuous material handling.
Product Specifications
|
Product Specifications |
Details |
|
Engine |
Weichai WP6G130E22, 6-cylinder, 6.75 L, 97 kW / 130 HP, Tier 2 / Stage II |
|
Transmission |
Hangchi WG180, 4 forward / 3 reverse, power-shift |
|
Drive Axles |
ZL50, 25-tonne static load rating |
|
Cooling System |
Dual-core radiator with separate cooling circuits |
|
Bucket Capacity |
3.8 m³, for materials up to 1.3 t/m³ |
|
Rated Load |
5,000 kg |
|
Static Tipping Load |
108 kN straight; 92 kN at 40° |
|
Breakout Force |
102 kN, ISO 14397-2 |
|
Dumping Dimensions |
4,100 mm lift height; 3,100 mm clearance; 1,150 mm reach |
|
High-Density Materials |
3.0 m³ bucket or 80% fill for 1.4–1.6 t/m³ materials |
|
Fuel Consumption |
19–23 L/h under specified gravel-loading conditions |
|
Fuel Tank & Runtime |
230 L; approximately 10–12 hours |
|
Maintenance Intervals |
Engine: 250 hours; transmission and hydraulics: 1,000 hours |
|
Wear Part Life |
Cutting edges: 1,200–1,500 hours; tires: 3,500–5,000 hours |
Low-Speed Torque & Traction Performance
Peak Engine Torque: Powered by a Weichai industrial diesel engine delivering 520 N·m of peak torque at 1,400–1,600 RPM, optimized for low-end power when driving into high-resistance material piles.
Maximum Drawbar Pull: Generates up to 105 kN of traction force, verified under standard wheel-load testing (tested on dry concrete with an unladen weight of 13,200 kg on standard 23.5-25 L3 tires).
Torque Converter Multiplication: Features a YJ315 hydraulic torque converter with a 3.23:1 zero-speed multiplication ratio to amplify low-end torque during initial bucket crowding.
Gradeability: Delivers a maximum rated gradeability of 30° (58%) under standard operating load on firm, dry unpaved surfaces.
Heavy-Duty Structure
Operating Weight & Dimensions: Features a 13,200 kg operating weight, 2,900 mm wheelbase, 2,250 mm track width, and 450 mm ground clearance.
Axle Load Distribution: Unladen weight distribution is balanced at 5,800 kg on the front axle and 7,400 kg on the rear.
Chassis & Boom Fabrication: Articulated frames and lift arms are fabricated from Q345B structural steel, utilizing 20 mm to 30 mm box-section welded plates at high-stress pivot zones.
Bucket Wear Protection: Incorporates Q345B body plates with HB400 wear-resistant steel strips (16 mm thickness) along the base and side cutters, plus bolt-on reversible edges.
Turning Radius: Features a 40° articulation angle with a minimum turning radius of 6,250 mm measured at the outer bucket edge in transport position.
Hydraulic System
Hydraulic Pump Setup: Utilizes a CBGJ dual-gear pump system delivering a total system flow of 220 L/min at rated engine speed (2,200 RPM).
System Pressure: Main working pressure is set to 18 MPa, managed through pilot-operated control valves.
Working Cycle Times: Features a 5.8-second boom raise, 1.2-second dump, and 3.5-second float-down, yielding an approximate 10.5-second total cycle time (tested at 2,200 RPM with a 5,000 kg load and 55°C hydraulic oil temp).
Cylinders & Auxiliary Lines: Built with dual lift cylinders (110 mm bore, 784 mm stroke) and dual tilt cylinders (140 mm bore, 360 mm stroke), with optional third-function auxiliary lines available.
Export Delivery
Testing: Every machine undergoes dynamic overload testing (1.25x), hydraulic pressure verification at 22 MPa, and 4-wheel braking checks (individual factory test sign-off reports included with each unit).
Quality Certification: Operating under ISO 9001:2015 Quality Management System certification.
Global Logistics: Routinely shipped internationally via 40ft high-cube flat racks, RORO vessels, or breakbulk with anti-corrosion prep.
Warranty: Backed by English manuals, schematics, parts catalogs, and a standard 12-month or 2,000-hour machine warranty (covering engine, transmission, axles, and pumps) with priority parts dispatch.



FAQ
Q: Is this loader powerful enough for our quarry or yard?
A: It suits aggregate quarries, construction sites, and bulk yards handling materials up to 1.3 t/m³ when the bucket is filled to capacity. For denser materials, we recommend a reduced-volume bucket.
Q: Which bucket should we order for our material?
A: Choose the standard 3.8 m³ bucket for sand, gravel, and light aggregates. For dense materials such as blasted rock, a smaller reinforced rock bucket is the better choice.
Q: Can the loader be matched to our haul trucks?
A: Yes. Share your truck model and body capacity, and we will recommend a bucket size that delivers the optimal number of passes per load.
Q: Can the loader operate in extreme temperatures or at high altitude?
A: Yes. It is rated for operation from -20°C to +45°C and at altitudes up to 2,000 m. Cold-start, enhanced cooling, and high-altitude packages are available on request.
Q: Is CE marking or other regional certification available?
A: Yes. We can arrange CE marking and other regional compliance packages as an option, subject to additional lead time and cost.
Q: Can we inspect the loader before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the machine at our factory and witness a full functional test before release.
Q: What are the MOQ and standard lead time?
A: MOQ is 1 unit. Standard lead time is 20 to 30 days from deposit confirmation, depending on configuration and attachment selection.
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Hot Tags: high-torque wheel loader, China high-torque wheel loader manufacturers, suppliers, factory, 4WD Wheel Loaders, Engineering Wheel Loader, High Horsepower Wheel Loaders, Light Duty Wheel Loaders, Multi functional Wheel Loader, wheel loaders
You Might Also Like
Send Inquiry




