Engineering Wheel Loader
video
Engineering Wheel Loader

Engineering Wheel Loader

When you're on an engineering site, waiting for a loader to get fixed or struggling with one that can't handle heavy loads is the worst. It slows down your whole team, eats into your timeline, and adds extra costs. That's why we started recommending this Engineering Wheel Loader to our clients—we've seen it hold up in real, messy job conditions, and it's saved them a lot of headaches.

Product Introduction

This Engineering Wheel Loader is designed for construction and industrial teams that need a reliable machine for demanding job-site conditions. With a 2,680 mm wheelbase, it offers good maneuverability in confined areas. Its bucket features an 18 mm-thick Q345B steel shell and a replaceable wear-resistant cutting edge for added durability.

 

Product Specifications

 

Product Specification

Details

Calculated Reference Payload

3,150 kg; calculated at 50% of full-turn tipping load, not independently certified

Static Tipping Load

71 kN straight; 62 kN at 35° articulation (ISO 14397-1)

Bucket Capacity

3.1 m³ heaped

Breakout Force

88 kN

Dumping Height / Reach

3,500 mm / 1,050 mm

Hydraulic Cycle Time

10.2 s (raise 5.6 s, lower 2.3 s, dump 2.3 s)

Engine

Weichai WP6G125E22, 6-cylinder, 6.75 L turbo diesel

Power / Torque

92 kW (125 HP) at 2,200 rpm; 515 N·m at 1,400–1,600 rpm

Emissions Compliance

Batch-specific non-road documentation; target-market compliance to be confirmed

Transmission

Planetary powershift, 4 forward / 2 reverse gears; torque converter

Speed / Gradeability

38 km/h theoretical maximum; 30% empty-load gradeability on firm, dry slopes

Cab & Safety

AC, heating, suspension seat, dual-line service brakes, mechanical parking brake; ROPS/FOPS test reports available

Fuel Consumption

16–20 L/h estimated at 80% average load

Service Intervals

Engine oil: 250 h; hydraulic oil: 1,000 h; transmission oil: 500 h

Wear Part Life

Cutting edge: 1,200–1,500 h; tires: 2,000–3,000 h, depending on conditions

 

Application Scenarios

 

Quarry & Surface Loading: Suitable for loading loose rock, crushed stone, and raw minerals into haul trucks at surface mining and aggregate yards.

 

Construction Site Loading: Supports bulk earthmoving, site clearing, foundation backfilling, and moving aggregates.

 

Stockpile & Yard Management: Handles sand, gravel, coal, and industrial bulk materials in distribution yards and storage facilities.

 

Material Density & Bucket Matching: Evaluated for loose bulk materials with reference densities of 1,000 to 1,150 kg/m³, using an estimated 85% fill factor to stay within calculated payload limits for the 3.1 m³ bucket.

 

Structural Durability

 

Frame Construction: Front and rear articulated frames fabricated from Q345B low-alloy structural steel plates (20 mm main frame side plates) welded via automated gas-metal arc welding.

 

Axles & Differentials: Heavy-duty planetary reduction drive axles equipped with standard limited-slip differentials.

 

Tire Configuration: Fitted with 17.5-25 12PR L-3 tread pneumatic bias-ply tires optimized for gravel, earth, and general industrial yards.

 

Bucket Durability: 18 mm thick Q345B bucket shell with a replaceable bolt-on wear-resistant steel cutting edge and side segments.

 

Hydraulic System & Steering Control

 

Hydraulic Pump Configuration: Gear pump delivering a rated flow of 145 L/min (at rated engine speed) with a main relief valve setting of 16 MPa for the working circuit.

 

Cylinder Dimensions: Dual lift cylinders (110 mm bore, 784 mm stroke) and dual tilt cylinders (140 mm bore, 542 mm stroke) equipped with multi-lip seals.

 

Control Response: Pilot joystick control system providing proportional hydraulic response for boom and bucket handling.

 

Steering Performance: Load-sensing hydraulic articulated steering providing a 35° steering angle to each side and a 5,820 mm turning radius (measured at outer tire edge).

 

Thermal Management: Integrated hydraulic oil cooler circuit to maintain operating temperatures during sustained multi-hour loading shifts.

 

Customization Options

 

Buckets: 2.5 m³ heavy-duty rock bucket and 2.8 m³ side-dump bucket. A 3.5 m³ light-material bucket is available for materials below approximately 800 kg/m³, subject to payload compatibility.

 

Attachments: Quick-hitch couplers, pallet forks, log grapples, and V-type snow plows.

 

Hydraulics: Optional third-function auxiliary valve and pipelines for attachments requiring continuous hydraulic flow.

 

Tires: Optional L-5 deep-tread rock tires for severe quarry applications.

 

product-1200-300

 

.jpg

 

FAQ

 

Q: Which bucket should we order for our material?

A: Match the bucket to your material density: the heavy-duty rock bucket for blasted stone, the standard bucket for sand and gravel, and the light-material bucket for coal or wood chips.

Q: Can the loader be matched to our haul trucks?

A: Yes. Share your truck model and body capacity, and we will recommend a bucket size that delivers the optimal number of passes per load.

Q: Will the engine meet our country's emission requirements?

A: Please share your target market's regulations before ordering. We will confirm compliance and supply the matching documents, with Euro V or EPA Tier 4 Final configurations available on request.

Q: Is CE marking or other regional certification available?

A: Yes. We can arrange CE marking and other regional compliance packages as an option, subject to additional lead time and cost.

Q: Can we inspect the loader before shipment?

A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the machine at our factory and witness a full functional test before release.

Q: What warranty do you provide?

A: We offer a 12-month or 2,000-hour warranty, whichever comes first, covering the engine, transmission, axles, and main hydraulic pumps. Replacement parts are supplied free of charge during the warranty period. Wear items are excluded.

Q: What are the MOQ and standard lead time?

A: MOQ is 1 unit. Standard lead time is 20 to 30 days from deposit confirmation, depending on configuration and attachment selection.

Q: What payment terms do you offer for export orders?

A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.

Hot Tags: engineering wheel loader, China engineering wheel loader manufacturers, suppliers, factory, 4WD Wheel Loaders, Engineering Wheel Loader, High Power Wheel Loader, High Torque Wheel Loader, Multi functional Wheel Loader, wheel loaders

You Might Also Like

(0/10)

clearall