Full-Hydraulic Excavator
This Full-Hydraulic Excavator is built for trenching, foundation excavation, roadwork, and material handling. Powered by a full-hydraulic pilot system, each machine translates operator joystick inputs into precise hydraulic responses for smooth, multi-function control on active job sites.
Product Introduction
This Full-Hydraulic Excavator is built for trenching, foundation excavation, roadwork, and material handling. Powered by a full-hydraulic pilot system, each machine translates operator joystick inputs into precise hydraulic responses for smooth, multi-function control on active job sites.
Product Parameters
|
Product Parameter |
XY60 |
XY135 |
XY210 |
XY250 |
|
Bucket / Arm Force (kN) |
45 / 32 |
98 / 68 |
152 / 105 |
170 / 120 |
|
Max. Digging Depth (mm) |
3,800 |
5,500 |
6,500 |
6,900 |
|
Max. Reach (mm) |
6,100 |
8,300 |
9,800 |
10,200 |
|
Digging / Dumping Height (mm) |
6,500 / 4,600 |
8,500 / 6,000 |
9,600 / 6,800 |
10,100 / 7,100 |
|
Standard Bucket Capacity (m³) |
0.25 |
0.52 |
0.93 |
1.20 |
|
Engine / Power (kW) |
Kubota V2607 / 48 |
Isuzu 4JJ1X / 78 |
Cummins QSB4.5 / 125 |
Cummins QSB6.7 / 140 |
|
Average Fuel Consumption (L/h) |
5.5 |
9.2 |
15.0 |
18.5 |
|
Ground Pressure (kPa) |
33 |
38 |
47 |
52 |
|
Track Shoe Width (mm) |
400 |
500 |
600 |
600 |
|
Track Gauge (mm) |
1,800 |
2,200 |
2,390 |
2,590 |
Hydraulic Compatibility
Bucket Configurations: Supports general-purpose digging, heavy-duty rock, and wide ditching buckets.
Hydraulic Attachments: Auxiliary circuits power hydraulic breakers, shears, grapples, and plate compactors sized to machine tonnage.
Quick Coupler Systems: Compatible with hydraulic pin-grabber quick hitches using dedicated auxiliary pilot lines and model-standard pin dimensions.
Control Upgrades: Factory-optional secondary auxiliary lines and proportional joystick thumbwheel controls.
Structural Design
Track Assembly: Sealed track links fitted with triple grouser shoes: 400 mm (XY60), 500 mm (XY135), and 600 mm (XY210 / XY250).
Ground Pressure: Calculated operating ground bearing pressure: 33 kPa (XY60), 38 kPa (XY135), 47 kPa (XY210), and 52 kPa (XY250).
Hydrostatic Travel: Dual-speed travel motors delivering 2.8 km/h (low) and 5.2 km/h (high) with a maximum gradeability of 35° (70%).
Structural Steel: Frames, booms, and arms built from high-tensile Q355B carbon steel plate (GB/T 1591-2018 standard) with reinforced pivot points.
Stability Stance: Integrated counterweights (800 kg to 4,800 kg) paired with model track gauges of 1,800 mm, 2,200 mm, 2,390 mm, and 2,590 mm, and track contact lengths up to 3,650 mm.
OEM & Private Label
Private Label Branding: Custom branding packages including exterior decals, counterweight logos, serial plates, and branded manual covers.
Custom Coatings: Machine paint available in designated RAL colors to match company fleet branding.
Powertrain & Hydraulic Customization: Tailored engine builds, cab guard structures, and auxiliary valve options evaluated during technical reviews.
Quality Inspection
Weldment NDT: Critical load-bearing welds undergo non-destructive testing (NDT) via Magnetic Particle (MT) and Ultrasonic (UT) inspection per JB/T 5946 standards.
Hydraulic Circuit Testing: Sub-assemblies undergo 100% bench testing at 1.25x rated working pressure for 15 minutes to verify relief settings and zero leakage.
4-Hour Machine Testing: Completed excavators undergo a mandatory 4-hour performance test covering travel tracking, swing torque, compound movements, and thermal stability.
Quality Compliance: Facilities operate under an ISO 9001:2015 quality management system. Individual factory test reports ship with each machine.
Export Shipping
Export Documentation: Standard export packages include Commercial Invoice, Packing List, Bill of Lading, and Origin Certificates (Form E, Form A, or CCPIT CO).
Protective Packaging: Machine exteriors coated with anti-corrosion wax, cylinder rods grease-wrapped in waterproof tape, and units secured with wire rope lashing.
Trade Terms: Shipped under Incoterms 2020 (FOB, CFR, or CIF) from Qingdao Port.
Lead Time: Standard factory production lead time is 20 to 35 days from deposit confirmation.


FAQ
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Q: Can we inspect the machine before shipment?
A: Yes. You or your appointed third party (SGS, BV, or TÜV) may inspect the excavator at our factory and witness a functional run before release.
Q: Do you provide samples or live demonstrations?
A: We offer live video demonstrations of digging, swing, and travel functions, as well as factory visits by appointment.
Q: Is a recommended spare parts kit available?
A: Yes. We offer a one-year wear-parts kit, including filters, seals, bucket teeth, and hydraulic hoses, which can ship with the machine to minimize downtime.
Q: Can the excavator work in extreme temperatures or at high altitude?
A: Yes. It is rated for operation from -20°C to +45°C and at altitudes up to 2,000 m. Cold-climate and high-altitude packages are available on request.
Q: What emission standard does the engine meet?
A: Standard engines meet Euro III / EPA Tier 2 equivalent levels. Euro V or EPA Tier 4 Final configurations are available on request for markets with stricter regulations.
Q: Is CE marking or other regional certification available?
A: Yes. CE marking and other regional compliance packages can be arranged as an option, subject to additional lead time and cost.
Q: What warranty do you provide?
A: We provide a 12-month or 2,000-hour warranty, whichever comes first, covering structural components, hydraulic pumps, and travel motors. Replacement parts are supplied free of charge during the warranty period.
Hot Tags: full-hydraulic excavator, China full-hydraulic excavator manufacturers, suppliers, factory, excavator, Full Hydraulic Excavator, Multi functional Excavator
You Might Also Like
Send Inquiry




