Large Wheeled Crane
The truck-mounted mobile crane is a heavy-duty hydraulic lifting system built for bridge erection, urban infrastructure, and industrial plant construction.
Product Introduction
The truck-mounted mobile crane is a heavy-duty hydraulic lifting system built for bridge erection, urban infrastructure, and industrial plant construction. Mounted on a heavy-duty multi-axle chassis, it provides rapid transit between job sites and quick outrigger setup on paved or compacted hard surfaces.
Product Parameters
|
Product Parameter |
Specifications |
|
Rated Capacity |
85 t at 3 m radius |
|
Counterweight |
18.5 t |
|
Main Boom |
22–50 m, 5 sections |
|
Load Capacity |
85 t / 3 m; 28.5 t / 10 m; 9.2 t / 20 m; 3.8 t / 30 m; 1.5 t / 40 m |
|
Auxiliary Jib |
9.5 m / 16 m; 0° / 15° / 30° |
|
Jib Capacity |
5.5 t / 7 m; 3 t / 9 m (0° offset) |
|
Maximum Hook Height |
45 m main boom; 61 m with jib |
|
Boom & Slewing Speed |
55 s elevation; 0–2 rpm slewing |
|
Load Chart |
360°, Forward and Rear capacity charts |
Carrier Chassis & Mobility
Chassis Architecture: 4-axle carrier (8×4 drive) with front-wheel hydro-mechanical steering and dual-circuit air brakes.
Transit Weight: Standard chassis travel weight is approximately 48,000 kg (includes chassis, cab, and main boom; excludes removable counterweights, auxiliary winch, and jib).
Axle Load Distribution: Detailed individual axle weights (Front Axles 1/2 and Rear Axles 3/4) are documented in the chassis manual for local transport permitting.
Transport Requirements: The 18.5 t counterweight assembly, auxiliary hook blocks, and lattice jibs travel on separate support vehicles to comply with highway weight regulations.
Mobility Specs: Max road speed of 45 km/h; max gradeability of 40% (tested unladen on dry, compacted concrete).
Outrigger, Engine & Hydraulic System
|
Product Parameter |
Specifications |
|
Outriggers |
H-type, 4-point hydraulic |
|
Outrigger Span |
7.2 × 7.0 m full; 7.2 × 4.8 m intermediate |
|
Maximum Ground Reaction |
580 kN |
|
Ground Bearing Reference |
450 kPa; approximately 1.3 m² theoretical contact area |
|
Leveling Accuracy |
±0.1° |
|
Engine |
6-cylinder turbo diesel, 147 kW |
|
Peak Torque |
1,000 Nm |
|
Hydraulic Pressure |
Up to 31.5 MPa |
|
Main Winch |
68 kN pull; 125 m/min |
|
Auxiliary Winch |
55 kN pull; 110 m/min |
|
Wire Rope |
19 mm main; 18 mm auxiliary |
|
Tank Capacities |
300 L fuel; 550 L hydraulic oil |
|
Fuel Consumption |
15–22 L/h |
Safety Controls
Load Moment Limiter (LML): Electronic LML with a 7-inch color display monitoring real-time load, radius, boom angle/length, and rated capacity percentage.
Limit Switches: Anti-two-block (A2B) switch at the boom tip and 3-wrap rope limiters on both winches with automatic hydraulic cutoff.
Safety Valves: Integrated pressure-relief valves, anti-burst check valves on all hydraulic cylinders, and an emergency stop button.
Cab Environment: Steel all-weather operator cab with 360° safety glass, adjustable suspension seat, pilot joysticks, and HVAC.
Design Standards: Structural engineering per GB/T 3811; stability principles aligned with ISO 4305.
Maintenance Support
Serviceability: Ground-level fluid checkpoints, centralized grease lubrication manifolds, and quick-access filter panels.
Maintenance Schedule: Service intervals are set at 250 operating hours for engine oil/filters and 1,000 hours (or annually) for hydraulic oil and return filters.
Spare Parts Availability: Factory-stocked inventory for high-wear items, including seals, filter elements, brake pads, and wire ropes.
Warranty Coverage: 12-month or 2,000-operating-hour warranty on structural welds, hydraulic pumps, and main gearboxes.
Technical Assistance: Includes bilingual (English/Chinese) manuals, electrical/hydraulic schematics, and remote diagnostic support.
Commercial Terms
- MOQ: 1 unit.
- Standard lead time: 30 to 45 business days.
- OEM options available for custom paint and regional road-lighting packages.
- Global Logistics: Exported to over 50 countries across Central Asia, Southeast Asia, the Middle East, and Africa via Ro-Ro or Flat Rack sea freight with anti-corrosion marine packaging.



FAQ
Q: What payment terms are available for export orders?
A: Our standard payment options are a 30% T/T deposit with the balance payable against a copy of the Bill of Lading, or an irrevocable L/C at sight.
Q: Can we inspect the crane before shipment?
A: Yes. You or your appointed inspection agency, such as SGS, BV, or TÜV, are welcome to inspect the crane at our factory.
Q: Can you provide CE marking or other regional compliance certifications?
A: Yes. CE marking and other regional compliance packages can be arranged upon request, subject to additional lead time and cost.
Q: What emission standard does the engine meet?
A: The standard engine complies with a Euro III-equivalent emission standard. Euro V and Tier 3 engine configurations are also available for markets with stricter environmental requirements.
Q: Can the crane operate in extreme temperatures or at high altitude?
A: Yes. The standard crane is rated for operation in temperatures ranging from -20°C to +45°C and at altitudes of up to 2,000 meters.
Q: Do you provide operator training and commissioning services?
A: Yes. Our engineers can travel to your site to provide on-site commissioning, as well as a comprehensive 3-to-5-day training program covering crane operation and routine maintenance.
Q: How quickly do you respond to after-sales service requests?
A: Our service team responds to technical inquiries within 24 hours. Critical spare parts can be dispatched by express courier within 48 hours.
Q: Are extended warranty and service contracts available?
A: Yes. Warranty coverage can be extended to 24 or 36 months. Optional service contracts are also available and may include scheduled inspections, priority technical support, and priority spare-parts supply.
Hot Tags: large wheeled crane, China large wheeled crane manufacturers, suppliers, factory, crane, Large Wheeled Crane, Straight Boom Truck Mounted Crane
You Might Also Like
Send Inquiry







