Used Auman Trucks
Used Auman 8×4 dump trucks are heavy-duty tippers configured for earthmoving, quarry transport, and site preparation.
Product Introduction
Used Auman 8×4 dump trucks are heavy-duty tippers configured for earthmoving, quarry transport, and site preparation. Built on the Auman ETX chassis platform with dual front steering axles and double-reduction rear drive axles, these units manage heavy payloads across unpaved site roads and steep grade inclines.
Product Parameters
|
Product Parameter |
Specification |
|
Engine |
Weichai WP12 / Foton Cummins ISGe |
|
Power |
375 / 400 HP @ 1,900 RPM |
|
Peak Torque |
1,800–1,900 Nm |
|
Transmission |
FAST 12-speed manual |
|
Drive Type |
8×4 |
|
Axles |
Hande / Ankai, double-reduction rear axles, differential locks |
|
Fuel Tank |
300–400 L, aluminum or steel |
|
Cooling System |
Heavy-duty radiator, viscous fan clutch |
|
Overall Dimensions |
Approx. 9.6 × 2.5 × 3.5 m |
|
Dump Body |
6.5 × 2.3 × 1.8 m; 26.9 m³ |
|
GVW |
31,000 kg |
|
Curb Weight |
Approx. 11,000 kg |
|
Axle Ratings |
Front: 7,000 kg/axle; Rear: 16,000 kg/axle |
|
Tires |
12.00R20 / 12R22.5; minimum 8 mm tread depth |
Used Condition
Engine Cold-Start & Leak Check: Tested after overnight engine cooling to verify cold-crank speed, idle stability, exhaust smoke density, and seal integrity across cylinder head gaskets, valve covers, and crankshaft oil seals.
Drivetrain & Hydraulic Testing: Checked for gear engagement precision, synchronizer wear, and clutch travel, with pressure and leak checks across the transmission housing, hydraulic lift cylinders, PTO, and power steering pump.
Chassis & Frame Alignment: Frame rails and crossmembers are measured for straightness, structural cracks, repair welds, or deep corrosion.
Defect & Condition Disclosure: Every vehicle is dispatched with an itemized Pass / Repair Required / Not Applicable inspection sheet, documenting verified component wear and completed shop work.
Mileage & History Disclosure
Mileage Verification: Odometer readings range from 100,000 km to 250,000 km and are cross-checked against engine ECU operating hours where diagnostic access is supported.
Service Records: Historical maintenance logs-including oil service intervals and filter replacement records-are reviewed against available fleet workshop entries.
Component Repair History: Major prior repairs (e.g., turbocharger replacements, cylinder head servicing, transmission overhauls) are disclosed prior to purchase.
Accident Disclosure: Frames and cabs are screened for major structural impact damage, twisting, or rollover repairs; structural modifications are disclosed in writing.
Legal Compatibility
Production & Model Years: Documented on Chinese registration papers covering inventory production years from 2017 to 2021.
Emission Classification: Certified to China National IV or China National V standards (technically comparable to Euro IV / Euro V in key parameters; does not constitute European EC approval).
Aftertreatment System: Equipped with factory SCR (Selective Catalytic Reduction) and AdBlue dosing systems; OBD scans check active/stored fault codes and sensor responses.
Steering Layout: Factory Left-Hand Drive (LHD) setup; buyers must confirm local regional import age and LHD registration eligibility.
Documentation Provided: Shipped with Chinese Vehicle Deregistration Certificates, original chassis tags, engine block stampings, and export customs declarations.
Logistics & Shipping
Shipping Documentation: Commercial Invoice, Packing List, Export Customs Declaration, and Deregistration Certificate are issued before departure; clean original Bills of Lading (B/L) follow vessel loading.
Vessel Options: Transported via Roll-on/Roll-off (Ro-Ro) vessels or specialized Flat Rack container frames based on port capabilities.
Loading Ports: Primary dispatch ports are Qingdao Port and Tianjin Port, China.
Shipment Preparation: Vehicles undergo anti-corrosion chassis washing, battery isolation, fuel drainage to safe transport levels (~15–20 liters), and dump bed mechanical locking.
Lead Time: Shop servicing, export clearance, and port delivery require 10 to 20 working days from deposit confirmation.



FAQ
Q: Can we see the truck live before making a deposit?
A: Yes. We offer live video walkarounds covering cold start, engine bay, undercarriage, and dump body operation. Yard visits are also available by appointment.
Q: Can an independent party inspect the truck before shipment?
A: Yes. You or your appointed third party (SGS, CCIC, or BV) may inspect the truck at our yard or port before final payment.
Q: Will these trucks meet our country's import rules on vehicle age and emissions?
A: Please share your national import regulations before ordering. We will match stock to your requirements and supply the supporting documents your customs authority requires.
Q: What warranty do you provide on a used unit?
A: Used trucks are sold as-is by default. A limited 3-month or 10,000 km powertrain warranty can be added at an extra cost.
Q: Can we reserve a specific truck while we review the inspection sheet?
A: Yes. A specific unit can be held for 7 days upon receipt of a 10% refundable reservation deposit, giving you time to review the dossier and arrange inspection.
Q: Can the dump body be modified for our material?
A: Yes. We can adjust side height, upgrade floor and side plate thickness, or add a rock guard, quoted separately according to your haul conditions.
Q: Can we mix different units in one shipment?
A: Yes. Multiple trucks can be consolidated into a single Ro-Ro or flat-rack shipment, which helps lower per-unit freight cost.
Hot Tags: used auman trucks, China used auman trucks manufacturers, suppliers, factory, Used Auman Trucks, Used Dongfeng Trucks, Used High Sided Truck, Used Jiefang Trucks, Used Shacman Trucks, used truck
You Might Also Like
Send Inquiry







