Used Construction Excavators
This Used Construction Excavator combines front-end loading and rear digging capabilities on a heavy-duty wheeled chassis.
Product Introduction
This Used Construction Excavator combines front-end loading and rear digging capabilities on a heavy-duty wheeled chassis. Designed for utility trenching, site prep, and material handling, it offers contractors and fleet operators a cost-effective alternative to mobilizing single-purpose earthmoving machinery.
Product Specifications
|
Product Specification |
Key Details |
|
Model & Year |
XCMG XT870 Backhoe Loader, 2021 |
|
Operating Weight |
8,200 kg, including buckets, full fuel tank, and fluids |
|
Transport Dimensions |
7.41 × 2.35 × 3.52 m |
|
Front Loader Bucket |
1.0 m³, 2,500 kg rated payload, 2.70 m dump clearance |
|
Rear Backhoe Bucket |
0.2 m³, 4.40 m digging depth, 60 kN breakout force |
|
Engine & Transmission |
Cummins 4BT3.9-C100, 74 kW / 100 HP @ 2,200 RPM; 4 × 4 drive, 4F/2R powershift |
|
Tire Condition |
Front: 21 mm tread (75% remaining); Rear: 32 mm (80% remaining) |
|
Axles & Hubs |
Planetary hubs; differential oil free of visible metal particles |
|
Braking & Travel |
3.8 m stopping distance from 20 km/h; parking brake holds on 20% slopes; 38 km/h top speed |
|
Front Bucket Wear |
14 mm cutting edge vs. 16 mm new; pin play below 0.8 mm |
|
Rear Bucket Wear |
Four forged teeth; 32 mm tip width vs. 42 mm new; kingpost pin clearance within 1.2 mm limit |
|
Auxiliary Hydraulics |
Factory two-way lines; flow and pressure specs available |
|
Cab & Safety |
Enclosed ROPS/FOPS cab, intact safety glass, seatbelt, reverse alarm, and working lights |
|
Air Conditioning |
Cools cab from 30 °C to 20 °C in 8 minutes |
|
Controls & Electrical |
Mechanical controls, steering, gauges, and electrical systems operational |
Excavation Performance
System Pressure: The gear pump produces stable pressure up to 20 MPa, the main relief limit at rated RPM.
Cylinder Hold Test: Loader and backhoe boom cylinders exhibited less than 3 mm of drift over 15 minutes while holding a loaded bucket at 68 °C oil temp.
Valves & Swing: Spool valves are clean with no external leakage; backhoe swing linkage operates smoothly through its full rotational arc.
Service History
Metered Hours: 3,420 hours displayed on the mechanical hour meter, cross-referenced against maintenance logs through October 2026.
Service Intervals: Documented engine oil and filter changes every 250 hours; main hydraulic fluid flush and filter replacement completed at 3,000 hours.
Component Replacements: Steering cylinder seals replaced at 2,800 hours; front tilt cylinder pins and bushings replaced at 3,100 hours.
Work History: Operated by a municipal utility contractor for urban pipe laying and asphalt patching.
Inspection Report
Inspection Protocol: Evaluated October 12, 2026, using an 85-point checklist covering frame, engine, hydraulics, brakes, and electrical systems.
Structural Status: Chassis frame, loader arms, and backhoe boom show no visible cracks or non-factory welds upon dimensional alignment checks.
Pending Maintenance: Minor hydraulic weeping at rear auxiliary quick-disconnect fittings; O-ring replacement and pressure verification required before dispatch.
Inspection Evidence: Photo set (45 images), 10-minute cold-start/operation video, and oil analysis summaries available upon request.
Operational Testing
Cycle Test: Completed a 60-minute continuous work test covering transit, steering, loader cycling, and trenching.
Thermal Stability: Engine coolant stabilized at 88 °C; hydraulic oil held at 65–68 °C.
Functionality: Simultaneous movements (loader lift + bucket curl) executed without hydraulic starvation or engine lag.
Export Support
Title & Verification: Frame PIN matches registration title; verified as clear of financial encumbrances.
Export Dossier: Commercial Invoice, Packing List, Clean On-Board Bill of Lading, and Certificate of Origin provided.
Transport & Logistics: 8,200 kg transport weight. Baseline height (3.52 m) requires partial disassembly for 40 ft High Cube container stowage. Direct RoRo or Flat Rack shipping is recommended for intact transport.
Trade Terms: EXW, FOB Qingdao, CFR, or CIF (Incoterms® 2020).


FAQ
Q: Can we see the machine live before making a deposit?
A: Yes. We offer live video walkarounds covering cold start, loader and backhoe operation, and undercarriage. Yard visits are also available by appointment.
Q: Can an independent party inspect the machine before shipment?
A: Yes. You or your appointed third party (SGS, CCIC, or BV) may inspect the machine at our yard or port before final payment.
Q: Can we confirm the hour meter reading is accurate?
A: Yes. The recorded hours are cross-checked against service logs, and we can supply oil analysis summaries and a cold-start video on request. An independent inspector may also verify the reading on site.
Q: Will this machine meet our country's import rules on equipment age and emissions?
A: Please share your national import regulations before ordering. We will confirm eligibility and supply the supporting documents your customs authority requires.
Q: What warranty do you provide on a used machine?
A: Used machines are sold as-is by default. A limited 3-month or 300-hour powertrain and hydraulic pump warranty can be added at an extra cost.
Q: What payment terms do you offer for export orders?
A: Our standard terms are a 30% T/T deposit, with the balance paid against a copy of the Bill of Lading or by irrevocable L/C at sight.
Q: How is the machine shipped?
A: Ro-Ro or flat-rack shipping is recommended to keep the machine intact.
Q: What are the MOQ and standard preparation time?
A: MOQ is 1 unit. Once the deposit is received, final servicing, minor repairs, and export documentation are typically completed within 7 to 12 days.
Hot Tags: used construction excavators, China used construction excavators manufacturers, suppliers, factory, Full Hydraulic Excavator, High Power Excavator, Large Wheeled Excavator, Reinforced Excavator, Used Construction Excavators, wheeled excavator
You Might Also Like
Send Inquiry






